Need some questions answered on AFR heads
Thread Starter
Supreme Member
Joined: Jan 2001
Posts: 1,236
Likes: 0
From: Brockton, MA, USA
Car: 1983 Z28
Engine: 6.6L 406
Transmission: T-56
Need some questions answered on AFR heads
First where have you guys gotten your AFR heads and how much have you paid? I was looking at there site and I looked at the 190cc and the 195cc heads and Iwas wondering what was the difference since there flow numbers are the same?
Which head do you think would most suit my set-up?
A roller 406 cam 224/230 .55x .56x 112 LSA
Superram intake with 30 lbs. injectors
MAP set-up
forged pistons with a 125 shot of NO2
The pistons I have make a compression of 10.3 with a 70cc head so I will prolly go with the 68cc head and it boost it up to around 10.5-10.6.
thanks for any help
Which head do you think would most suit my set-up?
A roller 406 cam 224/230 .55x .56x 112 LSA
Superram intake with 30 lbs. injectors
MAP set-up
forged pistons with a 125 shot of NO2
The pistons I have make a compression of 10.3 with a 70cc head so I will prolly go with the 68cc head and it boost it up to around 10.5-10.6.
thanks for any help
Thread
Thread Starter
Forum
Replies
Last Post
evilstuie
Tech / General Engine
22
Jan 9, 2020 08:29 PM