What 1/4 time u think i will pull off with this setup? 350 with 10.1cr with vortec heads 1.5 roller rockers and the lt4 cam with rpm intake with a 600cfm carb. so what do u think?

 

mid 13's @ 105

 

What tranny do you have? If auto, stall speed??? Rear end gear ratio? Any port work on those Vortecs? there alot of factors here.

With say a T-5/t-56 and 3.42 rear gears with minor port work and the mds you mentioned, I forsee low 13's easily.....maybe a high 12 or 2 on some sticky tires and 3.73's gears possibly...duno though

 

Well the trans is a t-56 with 3.43 rearend . The cam is a lt4 hot cam, i forgot to add the hot part. So high 12s. Cool