lost my maro!!don't race stang
Joined: Dec 2000
Posts: 2,361
Likes: 2
From: Buffalo, NY
Car: 1984 Trans Am
Engine: LT1
Transmission: T56
Axle/Gears: 10 bolt w/ 4.10 gears
Re: lost my maro!!don't race stang
psssttt... guys... 8T9 BANDIT is just joking! He's making fun of the original poster by coninuously saying crazier, more over-the-top things and hoping you will catch on!! Removing 6x9s as weight reduction, whooping a Z06 and Lambo.... does he have to say he beat a Delorian in a race to 1955 for you guys to catch on??!?!?! hehe
Supreme Member

Joined: Nov 2006
Posts: 1,724
Likes: 1
From: NY sucks
Car: 84' Corvette, 96' Caprice
Engine: LT1, L99
Transmission: T-56, 4L60e
Axle/Gears: 3.07 POSI, 2.93 Open
Re: lost my maro!!don't race stang
I was kinda of starting to figure that cause what he was saying did keep on getting more and more retarded lol
Banned
Joined: Jan 2007
Posts: 1,088
Likes: 0
From: NYTHIRDGEN
Car: 1989 T/A
Engine: PROCHARGED LB9
Transmission: FB BUILT 700r4 2200 stall
Axle/Gears: 10 BOLT EATON 3:73 POSI
Re: lost my maro!!don't race stang
psssttt... guys... 8T9 BANDIT is just joking! He's making fun of the original poster by coninuously saying crazier, more over-the-top things and hoping you will catch on!! Removing 6x9s as weight reduction, whooping a Z06 and Lambo.... does he have to say he beat a Delorian in a race to 1955 for you guys to catch on??!?!?! hehe
Joined: Jan 2006
Posts: 1,489
Likes: 0
From: Flowood,MS
Car: 87 IROC Z
Engine: 5.7 L98 TPI
Transmission: 700r4,2500 stall
Axle/Gears: G80,10 bolt 3.42's
Re: lost my maro!!don't race stang
I wouldnt race for titles if I had a 1200 hp car.Anything could happen.You could tear up your trans,drop the driveshaft.I mean come on this guy cant be for real?ANYTHING COULD HAPPEN,and you could loose your car.Stock for stock those lx 5.0`s were faster than tpi 305`s and as fast as alot of 350`s depending on driver,trans,gear.Anybody old enough to have a wife and kids should remember that
I love the jesus picture.That guy,no doubt,will not be replying to this thread if he is for real.
I love the jesus picture.That guy,no doubt,will not be replying to this thread if he is for real. Supreme Member

Joined: Nov 2006
Posts: 1,724
Likes: 1
From: NY sucks
Car: 84' Corvette, 96' Caprice
Engine: LT1, L99
Transmission: T-56, 4L60e
Axle/Gears: 3.07 POSI, 2.93 Open
Re: lost my maro!!don't race stang
I wouldnt race for titles if I had a 1200 hp car.Anything could happen.You could tear up your trans,drop the driveshaft.I mean come on this guy cant be for real?ANYTHING COULD HAPPEN,and you could loose your car.Stock for stock those lx 5.0`s were faster than tpi 305`s and as fast as alot of 350`s depending on driver,trans,gear.Anybody old enough to have a wife and kids should remember that
I love the jesus picture.That guy,no doubt,will not be replying to this thread if he is for real.
I love the jesus picture.That guy,no doubt,will not be replying to this thread if he is for real.???? I would race a 5.0 LX with a 305 TPI 5 spd, I'm pretty sure it would beat the stang. and a 5.7 tpi would beat it too...
Joined: Jan 2006
Posts: 1,489
Likes: 0
From: Flowood,MS
Car: 87 IROC Z
Engine: 5.7 L98 TPI
Transmission: 700r4,2500 stall
Axle/Gears: G80,10 bolt 3.42's
Re: lost my maro!!don't race stang
With a 5speed a tpi 305 would be close,but an A4 isnt 190 hp to 225.I`ve been in that race before.Friend of mine had a low mileage 90 LX 5.0 5speed and it was a beast.Beat me all the time.Granted niether one of us could drive,but he would rape me...and another friend who had a 350 A4 in a T/A.Now buddy with a formula350 would pull him every time but there was abig differance in gears between the two t/a`s and the formula 350.I`ve only seen one a couple of 305tpi 5speed around here in my life.Pretty rare around here from what I can tell.
I guess If I could buy one I could one I could start racing "stangs" for there titles.
I guess If I could buy one I could one I could start racing "stangs" for there titles.
Member
Joined: Jul 2007
Posts: 465
Likes: 0
From: york, PA
Car: 88 iroc camaro
Engine: jasper 350, l98
Transmission: 700R4, corvette servo, shift kit.
Axle/Gears: stock
Re: lost my maro!!don't race stang
this is the second funniest thread i have seen in a while. the other one was about a guy that wanted to keep a can of gas under his hood where his charcoal canaster used to be. look that one up if you want a real good laugh!!!
Junior Member
Joined: Aug 2008
Posts: 18
Likes: 0
From: all over
Car: 1992 camaro rs and 05 chevy z71
Engine: 305 for now
Transmission: stock
Axle/Gears: stock
Re: lost my maro!!don't race stang
DO WHAT???????????? YOU HAVE GOT TO BE KIDDING!!!!!!!! THATS HILARIOUS
Joined: Jan 2006
Posts: 1,489
Likes: 0
From: Flowood,MS
Car: 87 IROC Z
Engine: 5.7 L98 TPI
Transmission: 700r4,2500 stall
Axle/Gears: G80,10 bolt 3.42's
Re: lost my maro!!don't race stang
I read one on here a couple years ago where a guy hooked up N2O and said it wasnt doing anything when he hit the button.He couldnt understand.He said he drilled a hole and put the nozzle in the timeing cover at the cam or something.I`m no "mechanic" but I know enough to know it goes somewhere on the intake track.Or,I know to just read the directions or ask questions if I dont know much about it.
Supreme Member
iTrader: (1)
Joined: Dec 1999
Posts: 4,335
Likes: 4
From: Mays Landing NJ
Car: 2018 Camaro SS
Engine: LT1 w/Paxton 1500SL
Re: lost my maro!!don't race stang
I read one on here a couple years ago where a guy hooked up N2O and said it wasnt doing anything when he hit the button.He couldnt understand.He said he drilled a hole and put the nozzle in the timeing cover at the cam or something.I`m no "mechanic" but I know enough to know it goes somewhere on the intake track.Or,I know to just read the directions or ask questions if I dont know much about it.
Joined: Jan 2006
Posts: 1,489
Likes: 0
From: Flowood,MS
Car: 87 IROC Z
Engine: 5.7 L98 TPI
Transmission: 700r4,2500 stall
Axle/Gears: G80,10 bolt 3.42's
Re: lost my maro!!don't race stang
Hate to say it but it was on here.I`ll see If I can dig it up.
TGO Supporter
iTrader: (3)
Joined: Sep 2004
Posts: 1,064
Likes: 3
From: Sonoma CO. CA.
Car: 1984 Camaro Z28
Engine: L69 305 H.O.
Transmission: T-5
Axle/Gears: 3.73
Re: lost my maro!!don't race stang
i raced my 200 dollar 3rd gen drag slot car title for title once,,,,,,
and felt stupid doing that..
yes i said 200 dollar slot car ,, lol
scaled it does about 2700mph in the quarter hahahh
it was huge popular here for a long time but all the tracks are gone now ,,
it seems racing slotcars wasnt much different than real cars,,, drama drama and drama
ps anyone want too buy a 200 dollar slotcar will smoke a little afx wall pack first time ya pull the trigger hahahhaha
rail
and felt stupid doing that..
yes i said 200 dollar slot car ,, lol
scaled it does about 2700mph in the quarter hahahh
it was huge popular here for a long time but all the tracks are gone now ,,
it seems racing slotcars wasnt much different than real cars,,, drama drama and drama
ps anyone want too buy a 200 dollar slotcar will smoke a little afx wall pack first time ya pull the trigger hahahhaha
railTGO Supporter
iTrader: (3)
Joined: Sep 2004
Posts: 1,064
Likes: 3
From: Sonoma CO. CA.
Car: 1984 Camaro Z28
Engine: L69 305 H.O.
Transmission: T-5
Axle/Gears: 3.73
Re: lost my maro!!don't race stang
Supreme Member
iTrader: (2)
Joined: Aug 2007
Posts: 2,529
Likes: 1
From: Fairhope, AL
Car: 89RS(other cars & pics in vBgarage)
Engine: LO3, 305 TBI Mildly Modified
Transmission: BakerBuilt 700R4 w/B&M Megashifter
Axle/Gears: 3.23 Auburn Pro Series LSD
Re: lost my maro!!don't race stang
DONT EVEN BRING THAT ONE BACK TO LIFE!!!!!!!!!!!!!!!!!!!!!!!!
i sure hope someone locked that post, id hate to see it up in the new post section
I read one on here a couple years ago where a guy hooked up N2O and said it wasnt doing anything when he hit the button.He couldnt understand.He said he drilled a hole and put the nozzle in the timeing cover at the cam or something.I`m no "mechanic" but I know enough to know it goes somewhere on the intake track.Or,I know to just read the directions or ask questions if I dont know much about it.
i installed it right i just dont understand why it wont work....maybe if i install a gas can under the hood it will really light things up and get this N2O going.... BTW im so glad that you didnt call it NOS
Last edited by 89RS_82Z; Sep 21, 2008 at 02:28 AM. Reason: Automerged Doublepost
Supreme Member
iTrader: (3)
Joined: Oct 2005
Posts: 1,833
Likes: 0
From: Cincinatti OH
Car: 1991 L03 700r4 RS
Engine: 1987 WS6 Trans AM Lb2
Transmission: Th350 red neck Performance 3k stall
Axle/Gears: 95 Mustang 8.8 built with 3.73s
Re: lost my maro!!don't race stang
Hey I'll sell you a 1991 RS with nitrous under one condition, you race me for titles in my 1991 s10 as soon as you pick it up
Member

Joined: Sep 2006
Posts: 231
Likes: 0
From: chattanooga,tn
Car: 85 z28
Engine: 355ci
Transmission: th400
Axle/Gears: 3.73
Re: lost my maro!!don't race stang
I read one on here a couple years ago where a guy hooked up N2O and said it wasnt doing anything when he hit the button.He couldnt understand.He said he drilled a hole and put the nozzle in the timeing cover at the cam or something.I`m no "mechanic" but I know enough to know it goes somewhere on the intake track.Or,I know to just read the directions or ask questions if I dont know much about it.
Thread Starter
Senior Member
Joined: Feb 2006
Posts: 682
Likes: 0
From: newcomerstown,o
Car: 91 formula
Engine: 350 tpi
Transmission: auto
Axle/Gears: poss
Re: lost my maro!!don't race stang
you can all say want you want .i had pride in my maro. i didn't just sit around talking sh#t! me and my old 89z took it for what it was .i lost big fndeal ,i can buy 5 maros tomorrow, i don't care ! nso you all have pride in your maro's ? i bought the tang that ate me alive! for 3,500 ! so if u all want to talk sh*t i'll bet u'r maro too and take it home too! i don't want to hate 3 gen ,but e b talks and wonders why things are why they are. i put my money and pride where i ran my mouth . this 5.0 is one fast m-fer. keep your op's to yourself about how dumb i am ! at least i believed in my bowtie! and had the ***** to put it on the line! just didn't talk it!
Supreme Member
iTrader: (1)
Joined: Dec 1999
Posts: 4,335
Likes: 4
From: Mays Landing NJ
Car: 2018 Camaro SS
Engine: LT1 w/Paxton 1500SL
Re: lost my maro!!don't race stang
Holy Christ man, learn to type.....and wow....has our public educational system sunk that low...it took me a few minutes to decipher WTF you were trying to say.

Wow, you can buy 5 "maros", go you. So can I. I'll race you.
You have...ahem..HAD(
) a Fbody with a LO3 and you raced a Mustang. You deserved to lose.

Wow, you can buy 5 "maros", go you. So can I. I'll race you.

You have...ahem..HAD(
) a Fbody with a LO3 and you raced a Mustang. You deserved to lose. Joined: Jan 2006
Posts: 1,489
Likes: 0
From: Flowood,MS
Car: 87 IROC Z
Engine: 5.7 L98 TPI
Transmission: 700r4,2500 stall
Axle/Gears: G80,10 bolt 3.42's
Re: lost my maro!!don't race stang
Wow,he did reply.Whos bragging on there car here.not me.I dont own a race car.Thats why I dont race for money or titles...just for fun...That way I always go home happy....and not walking.
Yeah luckily,or unluckily I`m from mississippi so I was able to figure out what he was saying.Go through that quite often here.Although I did almost have to pull out my redn*ck to english dictionary.
Yeah luckily,or unluckily I`m from mississippi so I was able to figure out what he was saying.Go through that quite often here.Although I did almost have to pull out my redn*ck to english dictionary.
Last edited by Shadygrady; Sep 22, 2008 at 06:28 PM.
Supreme Member
iTrader: (1)
Joined: Dec 1999
Posts: 4,335
Likes: 4
From: Mays Landing NJ
Car: 2018 Camaro SS
Engine: LT1 w/Paxton 1500SL
Supreme Member
iTrader: (2)
Joined: Aug 2007
Posts: 2,529
Likes: 1
From: Fairhope, AL
Car: 89RS(other cars & pics in vBgarage)
Engine: LO3, 305 TBI Mildly Modified
Transmission: BakerBuilt 700R4 w/B&M Megashifter
Axle/Gears: 3.23 Auburn Pro Series LSD
Re: lost my maro!!don't race stang
you can all say want you want .i had pride in my maro. i didn't just sit around talking sh#t! me and my old 89z took it for what it was .i lost big fndeal ,i can buy 5 maros tomorrow, i don't care ! nso you all have pride in your maro's ? i bought the tang that ate me alive! for 3,500 ! so if u all want to talk sh*t i'll bet u'r maro too and take it home too! i don't want to hate 3 gen ,but e b talks and wonders why things are why they are. i put my money and pride where i ran my mouth . this 5.0 is one fast m-fer. keep your op's to yourself about how dumb i am ! at least i believed in my bowtie! and had the ***** to put it on the line! just didn't talk it!
Joined: Aug 2006
Posts: 12,812
Likes: 109
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
Junior Member
Joined: Aug 2008
Posts: 18
Likes: 0
From: all over
Car: 1992 camaro rs and 05 chevy z71
Engine: 305 for now
Transmission: stock
Axle/Gears: stock
Re: lost my maro!!don't race stang
its good to hear you had pride in your ride. i think we all are pretty proud of our cars. im so proud of mine that i would never be stupid enough to run it for titles. did you expect us to be sympathetic with you? and if i could afford to buy 5 more camaros, i think the one i raced (in your case, LOST) wouldve been better equipped to run that 5.0. and when you get mad enough to tell us off next time at least take your time typing it out so we can read it. kinda makes you look a little more moronic when we dont know what the hell you're trying to say. did you not think you were gonna get ragged and picked on about this? LOL LOL
Member
Joined: Feb 2006
Posts: 499
Likes: 0
From: Rock Hill, SC
Car: 91 GTA
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: stock
Re: lost my maro!!don't race stang
just when i thought this thread was about to die, the OP goes and says more stupid **** to continue this hilarious read. please continue. lmao
Member
Joined: Oct 2007
Posts: 157
Likes: 0
From: Carbondale/Sciota IL
Car: 1992 Camaro RS
Engine: 305 TBI
Transmission: 700R4 w/transgo 700 shift kit
Axle/Gears: 3.42 posi
Re: lost my maro!!don't race stang
i am the proud owner of an LO3 and I would race a 5.0 mustang for pinks any day... as long as it had about 300,000 miles on it, one flat tire, a blown head gasket, and no first gear

and thats why i deserted and got a 4th gen LS1... i know i know... but goin from 10.2's in the 1/8th to 8.9's in the 1/8th sure is a lot more fun.
and that LS1 will beat the PIS* out of that 5.0 mustang.

and thats why i deserted and got a 4th gen LS1... i know i know... but goin from 10.2's in the 1/8th to 8.9's in the 1/8th sure is a lot more fun.
and that LS1 will beat the PIS* out of that 5.0 mustang.
Supreme Member
iTrader: (3)
Joined: Oct 2005
Posts: 1,833
Likes: 0
From: Cincinatti OH
Car: 1991 L03 700r4 RS
Engine: 1987 WS6 Trans AM Lb2
Transmission: Th350 red neck Performance 3k stall
Axle/Gears: 95 Mustang 8.8 built with 3.73s
Re: lost my maro!!don't race stang
My stock TPI 350 does 8.5's in the 8th on ET Streets. I built a friend of mine a literal pile of JUNK Mustang, we called it project trash can, I poured water out of a few of the cylinders and had to crank it over with no spark plugs for a while to clean it all up and on street tires it went 8.8's. This was STOCK, the only real mods were a C4 trans and the low gears the car come with coupled with gorilla weight reduction throughout. I'm not going to rail you on racing I'm just going to tell you to learn a bit more about what you have and your competition. A few trips to the local test and tune will help you out alot.
Senior Member
iTrader: (2)
Joined: Jul 2007
Posts: 777
Likes: 4
From: Tampa/New Hampshire
Car: 91 camaro RS, 87 T/A
Engine: 350 TBI, 305 TPI
Transmission: 700r4
Axle/Gears: 4th Gen 3.42/BW 3.45
Re: lost my maro!!don't race stang
Wow man, learn how to type, and let me get this straight. You drive a TBI iroc in a race against a 5.0 stang, get your *** handed to you on a silver platter, and than two days later you buy the car that he beat you with? How dumb can you be, not only did he get an Iroc, but he also has 3500$ to mod the crap out of it. And if you can buy 4 camaros tomorrow, please do. And learn to form coherent scentences.
Supreme Member

Joined: Nov 2006
Posts: 1,724
Likes: 1
From: NY sucks
Car: 84' Corvette, 96' Caprice
Engine: LT1, L99
Transmission: T-56, 4L60e
Axle/Gears: 3.07 POSI, 2.93 Open
Re: lost my maro!!don't race stang
you can all say want you want .i had pride in my maro. i didn't just sit around talking sh#t! me and my old 89z took it for what it was .i lost big fndeal ,i can buy 5 maros tomorrow, i don't care ! nso you all have pride in your maro's ? i bought the tang that ate me alive! for 3,500 ! so if u all want to talk sh*t i'll bet u'r maro too and take it home too! i don't want to hate 3 gen ,but e b talks and wonders why things are why they are. i put my money and pride where i ran my mouth . this 5.0 is one fast m-fer. keep your op's to yourself about how dumb i am ! at least i believed in my bowtie! and had the ***** to put it on the line! just didn't talk it!
Supreme Member
iTrader: (2)
Joined: Aug 2007
Posts: 2,529
Likes: 1
From: Fairhope, AL
Car: 89RS(other cars & pics in vBgarage)
Engine: LO3, 305 TBI Mildly Modified
Transmission: BakerBuilt 700R4 w/B&M Megashifter
Axle/Gears: 3.23 Auburn Pro Series LSD
Re: lost my maro!!don't race stang
) but like i said my TBI is not near stock anymore & 8.9 in and LS1, i got a V6 honda thats only .2 seconds slower all its got is a CAI...... i know that LS1 is faster than that
Member
Joined: Oct 2007
Posts: 157
Likes: 0
From: Carbondale/Sciota IL
Car: 1992 Camaro RS
Engine: 305 TBI
Transmission: 700R4 w/transgo 700 shift kit
Axle/Gears: 3.42 posi
Re: lost my maro!!don't race stang
well considering id had the car a week and the only manuals id driven b4 were '70's ford grain trucks I could probably get it better. the launches were what was killing me. A couple weeks later I had it at a 1/4 mile and I ran 13.8 @ 103 which was right where everybody else with 4th gen LS1's were runnin.
and as for my LO3 its basically stock just headers, open element nd shift kit.
but btt.
and as for my LO3 its basically stock just headers, open element nd shift kit.
but btt.
Supreme Member
iTrader: (2)
Joined: Aug 2007
Posts: 2,529
Likes: 1
From: Fairhope, AL
Car: 89RS(other cars & pics in vBgarage)
Engine: LO3, 305 TBI Mildly Modified
Transmission: BakerBuilt 700R4 w/B&M Megashifter
Axle/Gears: 3.23 Auburn Pro Series LSD
Re: lost my maro!!don't race stang
yea never had the honda or camaro on a 1/4........ just seems wierd that the honda was close to that LS1.......o well.. dang import motors putting out high hp on little motors
Supreme Member

Joined: Nov 2006
Posts: 1,724
Likes: 1
From: NY sucks
Car: 84' Corvette, 96' Caprice
Engine: LT1, L99
Transmission: T-56, 4L60e
Axle/Gears: 3.07 POSI, 2.93 Open
Re: lost my maro!!don't race stang
Most don't put out good numbers, they typically ALL need turbos to push anything out of the 4cyl blocks...
Member
iTrader: (1)
Joined: Mar 2007
Posts: 382
Likes: 0
From: Mentone, CA
Car: 91 Z28
Engine: 355
Transmission: 5 speed
Axle/Gears: 10 bolt 3.73's
Re: lost my maro!!don't race stang
My car when it was stock would beat 5.0's by a few tenths in the quarter. LB9, 5 speed, G92(3.42 gears). Thats the 230hp, 300ft lbs LB9. Never got beat by a stock 5.0 when I used to take it to the track all the time.
Supreme Member
iTrader: (2)
Joined: Aug 2007
Posts: 2,529
Likes: 1
From: Fairhope, AL
Car: 89RS(other cars & pics in vBgarage)
Engine: LO3, 305 TBI Mildly Modified
Transmission: BakerBuilt 700R4 w/B&M Megashifter
Axle/Gears: 3.23 Auburn Pro Series LSD
Banned
Joined: Jan 2007
Posts: 1,088
Likes: 0
From: NYTHIRDGEN
Car: 1989 T/A
Engine: PROCHARGED LB9
Transmission: FB BUILT 700r4 2200 stall
Axle/Gears: 10 BOLT EATON 3:73 POSI
Re: lost my maro!!don't race stang
well considering id had the car a week and the only manuals id driven b4 were '70's ford grain trucks I could probably get it better. the launches were what was killing me. A couple weeks later I had it at a 1/4 mile and I ran 13.8 @ 103 which was right where everybody else with 4th gen LS1's were runnin.
and as for my LO3 its basically stock just headers, open element nd shift kit.
but btt.
and as for my LO3 its basically stock just headers, open element nd shift kit.
but btt.

----------
i think you stumbled into the wrong forum. what makes my day better is smoking a brand new slow *** stang like yours, in my little old 305
Last edited by 8T9 BANDIT; Sep 24, 2008 at 09:40 AM. Reason: Automerged Doublepost
Supreme Member
iTrader: (2)
Joined: Aug 2007
Posts: 2,529
Likes: 1
From: Fairhope, AL
Car: 89RS(other cars & pics in vBgarage)
Engine: LO3, 305 TBI Mildly Modified
Transmission: BakerBuilt 700R4 w/B&M Megashifter
Axle/Gears: 3.23 Auburn Pro Series LSD
Re: lost my maro!!don't race stang
and look its on the rack where fords belong
wait a second, i have owned a few Fords......one bad azz 460 to.....
but serriously why are you on a 3rd gen camaro site
well guess i need to go find a fox body site to join see ya!!!
Member
Joined: Dec 2005
Posts: 136
Likes: 0
From: VA
Car: Z28 / GT
Engine: TPI 5.0 / 3V 4.6
Transmission: A4 / M5
Axle/Gears: 3:23 / 4:30
Re: lost my maro!!don't race stang
You got me, but FYI, I too have a 1986 Camaro Iroc-Z for over the past 3 years now and been on this site b4 then, but recently got another ride as you can see, so I don't see where I have to leave just because I got a mustang.When I said its moments like this thats makes my day better, I was referring to the first post of the thread and seeing everyone's reaction afterwards,and how funny this is, sorry If I wasn't clear enough.
and also. I'm a chevy guy at heart, I just like to try new things.
Last edited by MidnightBlue07; Sep 24, 2008 at 08:05 PM.
Senior Member
Joined: Oct 2007
Posts: 585
Likes: 0
From: Stone Mtn., GA
Car: 90 Camaro RS
Engine: V6 3.1 MFI
Transmission: 4 Speed Auto 700R4
Axle/Gears: 3.23
Re: lost my maro!!don't race stang
Ok I can't read your post well but did you say you bought the mustang that beat you
. If you had so much pride in your Camaro why didn't you buy it back? I'm sure the guy doesn't really want it. Just had to add my 
. If you had so much pride in your Camaro why didn't you buy it back? I'm sure the guy doesn't really want it. Just had to add my 
Banned
Joined: Jan 2007
Posts: 1,088
Likes: 0
From: NYTHIRDGEN
Car: 1989 T/A
Engine: PROCHARGED LB9
Transmission: FB BUILT 700r4 2200 stall
Axle/Gears: 10 BOLT EATON 3:73 POSI
Re: lost my maro!!don't race stang
You got me, but FYI, I too have a 1986 Camaro Iroc-Z for over the past 3 years now and been on this site b4 then, but recently got another ride as you can see, so I don't see where I have to leave just because I got a mustang.When I said its moments like this thats makes my day better, I was referring to the first post of the thread and seeing everyone's reaction afterwards,and how funny this is, sorry If I wasn't clear enough.
and also. I'm a chevy guy at heart, I just like to try new things.

Banned
Joined: Jan 2007
Posts: 1,088
Likes: 0
From: NYTHIRDGEN
Car: 1989 T/A
Engine: PROCHARGED LB9
Transmission: FB BUILT 700r4 2200 stall
Axle/Gears: 10 BOLT EATON 3:73 POSI
Re: lost my maro!!don't race stang
dont get me started guy, if you own a thirdgen, im sure it would be in there. right?
actually, i do see you list a thirdgen in youre sig. thats my point. duh!
actually, i do see you list a thirdgen in youre sig. thats my point. duh!
Supreme Member
iTrader: (1)
Joined: Dec 1999
Posts: 4,335
Likes: 4
From: Mays Landing NJ
Car: 2018 Camaro SS
Engine: LT1 w/Paxton 1500SL
Re: lost my maro!!don't race stang
Regardless, a few people are whining that he's a Mustang owner on a Fbody board...who gives a ****. The guy is a previous thirdgen owner...should he announce it in every thread so people aren't offended? He can have whatever he wants in his sig(or lack thereof).
Banned
Joined: Jan 2007
Posts: 1,088
Likes: 0
From: NYTHIRDGEN
Car: 1989 T/A
Engine: PROCHARGED LB9
Transmission: FB BUILT 700r4 2200 stall
Axle/Gears: 10 BOLT EATON 3:73 POSI
Re: lost my maro!!don't race stang
^ dude, please read more carefully.. he CURRENTLY owns an iroc..... youre missing my point. its not all that complicated.





