Thinking of a purchase?
#1
Member
Thread Starter
Join Date: Apr 2002
Location: Tillsonburg,Ont.
Posts: 382
Likes: 0
Received 0 Likes
on
0 Posts
Thinking of a purchase?
Has anyone seen the new Lakewood traction & lift bars for Camaro/Firebird and what do ya think of them?
They are big bucks and fairly new on the market, but I don't know if there a proven product. Any info?
Thanks, Martin.
They are big bucks and fairly new on the market, but I don't know if there a proven product. Any info?
Thanks, Martin.
#3
Supreme Member
Join Date: Feb 2000
Location: Kemptville, Ontario, Canada
Posts: 3,145
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 Z28
Engine: 355
Transmission: 700R4
I have the Lakewood LCA's and trackbar. The LW liftbar kit has been around for a while. I think it's avoided for a reason, I just can't remember what that reason is.
#4
Member
Thread Starter
Join Date: Apr 2002
Location: Tillsonburg,Ont.
Posts: 382
Likes: 0
Received 0 Likes
on
0 Posts
Are we talking about the same part? I can't find any info on it, just have a pic. It replaces the LCA and has an adjustable rod below the new LCA. At the rear it has a bracket that clamps to the axle. Looks like when the axle twists it puts all the load on the front LCA mount, lifting the chassis.
The only problem I can see it having, is the clamp not holding tight enough and the axle twisting inside the clamps. I think a couple welds should fix that possibility. Dunno.
I emailed LW tech, but of coarse they only say good things about it. Direct bolt in and doesn't change the angle of the LCA.
Looks like a nice piece if it works the way it's designed.
The only problem I can see it having, is the clamp not holding tight enough and the axle twisting inside the clamps. I think a couple welds should fix that possibility. Dunno.
I emailed LW tech, but of coarse they only say good things about it. Direct bolt in and doesn't change the angle of the LCA.
Looks like a nice piece if it works the way it's designed.
#5
Member
Thread Starter
Join Date: Apr 2002
Location: Tillsonburg,Ont.
Posts: 382
Likes: 0
Received 0 Likes
on
0 Posts
Acceld Z, are these the bars your thinking of? Just don't wanna waste money on them if they're no good.
Stang Eater, can you find out from work if anyone has heard about these.
Thanks guys.
Stang Eater, can you find out from work if anyone has heard about these.
Thanks guys.
#6
Member
Join Date: Feb 2001
Location: Blenheim,Ontario,Canada
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
Yeah we have heard of them, and don't really think they are worth it.....In my opinion it would be smarter to spend your money on a good set of LCA's...tubular or boxed, and a set of relocation brackets....alot of people are hooking decent with that set up...I plan on buying Spohn, if I don't get around to making mine....maybe some SFC's, Shocks, Springs and Adj. Panhard down the road as necessary.
Stang Eater
Stang Eater
Thread
Thread Starter
Forum
Replies
Last Post
hectre13
Engine/Drivetrain/Suspension Parts for Sale
7
08-26-2015 08:17 AM
Thornburg
Transmissions and Drivetrain
10
08-25-2015 01:46 AM