i want to switch my 350ci L98 TPI to a carb. what do i need to complete the swap? im getting rid of my tpi because i crashed my '88 gta and i bought a '86 trans am with no engine (but it was carbed before) and i dont feel like throwing all the wires and computers in the new body. plus i hear you can gain up to 30hp 
and i can get like $200-$300 for a whole tpi setup on ebay 
and i can get like $200-$300 for a whole tpi setup on ebay 
Supreme Member
A quick search would yeild you lot's of info...but mainly you'd need..
Intake
Carb
Vac Advance distributor (at least a mechanical advance, but use vac advance for mpg's)
New fuel pressure regulator
Some wiring to the distributor, different plumbing for the fuel lines, if you're going to keep the 700r4, you'd also want some lockup switch setup (manually or automatically) for the TC, if you pull the ECM.
You might also need something to convert/run the speedo as well.
Intake
Carb
Vac Advance distributor (at least a mechanical advance, but use vac advance for mpg's)
New fuel pressure regulator
Some wiring to the distributor, different plumbing for the fuel lines, if you're going to keep the 700r4, you'd also want some lockup switch setup (manually or automatically) for the TC, if you pull the ECM.
You might also need something to convert/run the speedo as well.
thanks for the reply. im not keeping the 700r4, the body is coming with a T-5...so for that im going to need a new flywheel (externally balanced) and a new clutch(might as well replace it) what else do i need?