what else should i do
Thread Starter
Member
Joined: Nov 2005
Posts: 380
Likes: 0
From: Tulsa
Car: 86 Omni GLHT
Engine: 2.2 Turbo/Intercooled
Transmission: 5 speed
Axle/Gears: 3:85
what else should i do
what else should i do....
i have a stock plenum,runners, and injectors
so i was thinking either upgrading the stall converter to a 2800
or the injectors and porting the plenum... now keep in mind i just installed this cam and i think that it is being choked up.... so what would i benefit better from???
i have a stock plenum,runners, and injectors
so i was thinking either upgrading the stall converter to a 2800
or the injectors and porting the plenum... now keep in mind i just installed this cam and i think that it is being choked up.... so what would i benefit better from???
Joined: Aug 2005
Posts: 1,366
Likes: 1
From: louisville, ky
Axle/Gears: '01 3.42 10 bolt
stick with the same size injectors or you will have to do a prom for your car as well. porting the plenum with stock runners and base on a 305 will not get you anything
Joined: Aug 2005
Posts: 1,366
Likes: 1
From: louisville, ky
Axle/Gears: '01 3.42 10 bolt
true that may be, but the plenum flows more than the runners will provide. if you had aftermarket or ported runners and base, it would be a different story.