Im going to port the stock tpi intake to work better with the AS&M runners , anyone got pictures and advices on how to port the intake. I looked trough the tecnical articels but found nothing on how to do it.

So i really need som help with this.

 

Get a good Aluminum Carbide drum or tapered bit for your dremel ... take your time ... and go to it.

I would use the gaskets provided with the AS&M Runners as a "template" to draw out my pattern.

Also, try a at the top of this page. That should yield some excellent results.

If you're unsure, find MikeGrayCar on this site ... he will do it for you.

 

Ok , thank you . No i dont want someone to do it for me . Its better to learn it yourself but i would really need som pictures or something.

I dont want to ruin the intake by making stupid misstakes.

 

This isn't EXACTLY what you're looking for, but it might help ...

3rd° Tech Tips~Porting the Plenum

 

Thank you very much thats very usefull to me , im might be able to remove some more material from the plenum. I had no real idea of what i was doing when i ported the plenum.

Im looking for something like that for the intake.

 

This is based largely on the article mentioned by GCGarner but this is a bit of my porting work. intake porting

 

Nice Article Drac0nic!!!!