TPI Tuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Sponsored by:
Sponsored by:

Need Help!!

Thread Tools
 
Search this Thread
 
Old Jun 16, 2007 | 09:42 PM
  #1  
RocsRose86's Avatar
Thread Starter
Member
 
Joined: Apr 2007
Posts: 174
Likes: 0
From: The Boot(New Orleans) Louisiana
Car: 1986 Irocz28/04 GMC Yukon
Engine: Ram Jet 350(*TPI*)
Transmission: Turbo 400 w/1500 stall
Axle/Gears: 3.73
Need Help!!

Hey gutz I am in need of some desperate help. I have a daigram for the vaccum lines and how they are run, but still having trouble. I thought I had it going fine but i fouled up somewhere and you guyz on here know your sh//. This is soof wht I need to Know...Actually all your vaccum line knowledge would be awesome, anyway like where the egr valve hose goes to, the fuel pressure and so on. Any help would be very greatly appreciated. By the way thanks a million in advance!!


Mark.
Reply
Old Jun 16, 2007 | 09:56 PM
  #2  
RocsRose86's Avatar
Thread Starter
Member
 
Joined: Apr 2007
Posts: 174
Likes: 0
From: The Boot(New Orleans) Louisiana
Car: 1986 Irocz28/04 GMC Yukon
Engine: Ram Jet 350(*TPI*)
Transmission: Turbo 400 w/1500 stall
Axle/Gears: 3.73
Re: Need Help!!

This is what I have but ....

I need to know (preferably a picture) in detail where the "TO HVAC" goes exactly. And which hose goes where on the egr sol. and the fuel pressure regulator.... I had this all set 6mts ago then I had to Put a new engine in.

Last edited by RocsRose86; Jun 16, 2007 at 10:01 PM.
Reply




All times are GMT -5. The time now is 07:11 AM.