i just swapped my TPI stuff from my 305 to my 350 block. made a homemade adjustable fuel pressure regulator. what kind of pressure do i need to run to make up for the fact that its only got the 19# injectors instead of the 22#? any help would be appreciated
thanks

 

Try setting to 50 PSI for starters.... You can set the pressure by guessing, but you really need some kind of scanner to read your 02 sensor to get it set right. Or better yet, program a prom to allow for the smaller injectors.

------------------
Mike Metzler (Desert86Roc)[*] Webmaster: SpeedWorldMotorplex.com[*] Click Here For 86 IROC 305 TPI (406 build in progress) Page

ET's @ 1250 ft[*] 14.28 @ 95.461 mph (uncorrected, NOS, no headers)[*] 15.365 @ 86.785 mph (uncorrected, headers, no NOS)
<><

 

I have a 350 setup I am using on a 30, do you wanna trade injectors? I also have two 350 ecms, one witha custom chip. CAn we arrange some sort of trade, email me at lov2xlr8@aol.com

 

Sorry, it got cut off, I have 350 injectors and I need 305 injectors, so if you wanna trade or somthing e mail me.