ok i wanst planning on selling my motor, but i just got offered a grand for the whole motor and its tempting. how much is a 350 TPI motor worth? its in good shape, but its got 100,000 miles on it.

 

If it includes the TPI intake and electronics, its worth a grand. I personally wouldn't sell mine that cheap, but its up to you.

Why are you considering selling it?



------------------
Mike L.
It ain't pretty.......

1987 IROC Z TPI 350 A4 3.27 Borg-Warner.

Mods: 2300-2500 Stall Converter, Shift Kit(GM parts), TPI Specialties Stage 3 PROM, Modified Airbox w/ K&N's, homemade cold air, Relocated MAT sensor, Gutted MAF, 160* thermostat, Accel 8mm Wires, bypassed TB coolant, Flowmaster 3 chamber single 3" in/out muffler, 3" MAC mandrel intermediate, custom dual !cat Y-pipe. airfoil, ported plenum. !smog

http://www.MichaelLasiuta.home.att.net

**BOYCOTT LAPEER DRAGWAY**

 

im only even thinking about selling it because i crashed my car, and am parting the whole thing out. up untill now i was planing on keeping the motor, building it up and droping it into another car. if i sell it i want to get a fair price. you think 1000 is too low? im starting to think i should get at least 1200.

 

I don't think that I got a great deal but just for reference sake I paid $1500 for an 88 IROC L98 with 700-R4 attached. It included all of the accessories (still mounted), harness/computer and all. 100,000 miles on engine/tranny.

------------------
Red '85 MPFI V-6 T-5 Sport Coupe (bought new),now an IROC in sheeps clothing.
Rebuilt and installed '88 IROC L-98 TPI,700-R4,3.27 posi/disk rear,instrumentation, steering gear, and all suspension parts (even the wonder bar)
Mods:
IROC wheels, Hi-perf. rebuild on 700-R4,TCI sizzler torque conv.,B&M megashifter, L-98 .030 over,balanced,decked,blueprinted, SR Torquers, KB pistons,9.1:1 CR, port matched stock TPI, comp cams .450/480 206/210 cam, all free mods, subframe connectors, Edelbrock TES/jet hot coated, CATCO cat, Hooker catback, MSD 6A, airfoil, AFPR, K&Ns, polygraphite bushings all around, 1989 IROC memcal in summer, ARAP memcal in winter.

 

I could have bought a running 80k 1987 L98 entire car for 1100. The salvage yards here in Flint get around $600 for Engine, harness & ecm.



------------------
87 Formula Yellow/Black
Engine & Transmission
.040 over 5.0 converted to TPI, 9.5:1 Compression, SLP Cam Dur 206/212, Lift 480/487, Cent Line 112, SLP headers, SLP cat-back exhaust, K&N Airfilter, Modified Stock cold air intake, Ported & polished Stock TPI intake, Holley Adjustable Fuel Press regulator, AC Rapidfire Spark Plugs.
Gil Younger (no yo-yo) Shift Kit, Aluminum Driveshaft, 3.73 Posi gear
Suspension & Brakes:
Baer 12" brakes 4 wheels, KYB AGX Adjustable Shocks & struts, Hotchkis strut tower brace, South side machine frame connectors, Custom reinforced control arms and pan hard bar.
Interior:
Custom Leather interior, CUSTOM Yellow Gauge Faces, Kenwood Receiver, Pioneer Speakers, Kicker Substations, Kenwood 10 Disk Changer, Pioneer Amp.

87 Formula TPI (5 Speed) Yellow/Gray STOCK

1967 Buick Riviera 430hp Turns high 14's (Not bad for 4300 lbs)

83 Camaro (Parts)
83 T/A (parts)

http://www.3rdgenformula.com

 

i bought a 5.7 TPI for $1000.that's complete.motor,harness,ecm,all the sensors,dist.,everything but the starter
with 87K on it

------------------
1991 banditt2 #130 of 600
Project 350 TPI Banditt II
http://www.street-dawg-racing.cityslide.com
http://discussion-board.com/GreaterC...dyAssociation/
http://www.cincyspeed.com/