Im looking for C207 pinouts for an 88 TPI Camaro and a 90 TBI Camaro, I have to pinout my 90 to the 88 austin thirdgen does not have them for these years, Does anyone have them or know where i can get them

 

You can find them in the Electrical Section of the Service Manuals. Used one are listed all the time on e-bay.

Here is the 88 C207 connector, with the following VIN codes:

Vin S LB8 2.8L V6 MFI
Vin E L03 5.0L EFI
Vin F LB9 5.0L V8 TPI
Vin 8 L98 5.7L V8 TPI

As you will see in the listing some to the wires are specific to certain motors.

Sorry but I don't have any of the documentation for the 90 Camaro.

This is a pdf file with a sketch of the connector and a table listing the Cavity letter and the wire color/circuit for both sides of the connector. The female connector is shown in the sketch. This will get you half way there.

 

thank you very much thats great now i just need the 90 so i can get this done

 

I found the C207 pinout for a 92 camaro here: http://www.austinthirdgen.org/mkport..._1992_C207.gif

If its the same as the 90 camaro theyre are alot of differences and its kind of overwhelming