Transmissions and Drivetrain Need help with your trans? Problems with your axle?

5spd question

Thread Tools
 
Search this Thread
 
Old Dec 23, 2002 | 04:06 PM
  #1  
next_level's Avatar
Thread Starter
Junior Member
 
Joined: Feb 2002
Posts: 25
Likes: 0
5spd question

will the tranny out of a 6 cyl car (5spd) hold up behind a stock 305...it's going in my girlfriends car so it's not gonna see track time, or slicks, and the motor is all stock for now
Reply
Old Dec 23, 2002 | 04:23 PM
  #2  
1QWIKZ's Avatar
Member
 
Joined: Oct 2001
Posts: 383
Likes: 0
From: S.Jersey
Car: 88 Camaro
Engine: 355
Transmission: TH-350
Re: 5spd question

Originally posted by next_level
will the tranny out of a 6 cyl car (5spd) hold up behind a stock 305...it's going in my girlfriends car so it's not gonna see track time, or slicks, and the motor is all stock for now
I'm not positive but I believe it will not bolt up because of different bolt pattern........I definitely know that the 2.8's are different but one of these guys might have better input.
Reply
Old Dec 23, 2002 | 04:31 PM
  #3  
next_level's Avatar
Thread Starter
Junior Member
 
Joined: Feb 2002
Posts: 25
Likes: 0
i have a bellhousing from a v-8?

think that would work?
Reply
Old Dec 23, 2002 | 04:35 PM
  #4  
1QWIKZ's Avatar
Member
 
Joined: Oct 2001
Posts: 383
Likes: 0
From: S.Jersey
Car: 88 Camaro
Engine: 355
Transmission: TH-350
Originally posted by next_level
i have a bellhousing from a v-8?

think that would work?
Oh ****! I'm thinking of an auto! lol yea I would think so but not sure........sorry
Reply
Old Dec 23, 2002 | 08:02 PM
  #5  
MY-92-RS's Avatar
TGO Supporter
25 Year Member
iTrader: (3)
 
Joined: Jul 1999
Posts: 400
Likes: 15
From: NW/burbs Chicago
Car: 92 CAMARO RALLY SPORT
Engine: 383 sbc w/250 shot of nitrous
Transmission: AMERICAN POWERTRAIN- EXTREME TKX
Axle/Gears: STRANGE ENG. 12 BOLT 3:90 SPOOL
the V6 trans will bolt to a V8 but the clutch will not fit 26 spline for v8 10 spline for v6 .If you use V8 pressure plate and a clutch disk out of an s-10 4x4 2.8 v6 . everthing will go together. I have done this soo I know it will work . the low first gear in the v6 trany makes for great hole shots . beware IT WILL NOT LIVE LONG !! good luck
Reply
Old Dec 23, 2002 | 08:07 PM
  #6  
MY-92-RS's Avatar
TGO Supporter
25 Year Member
iTrader: (3)
 
Joined: Jul 1999
Posts: 400
Likes: 15
From: NW/burbs Chicago
Car: 92 CAMARO RALLY SPORT
Engine: 383 sbc w/250 shot of nitrous
Transmission: AMERICAN POWERTRAIN- EXTREME TKX
Axle/Gears: STRANGE ENG. 12 BOLT 3:90 SPOOL
the V6 trans will bolt to a V8 but the clutch will not fit 26 spline for v8 10 spline for v6 .If you use V8 pressure plate and a clutch disk out of an s-10 4x4 2.8 v6 . everthing will go together. I have done this soo I know it will work . the low first gear in the v6 trany makes for great hole shots . "BEWARE" IT WILL NOT LIVE LONG !! good luck BEWARE
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Bubbajones_ya
Electronics
4
Aug 31, 2015 12:02 PM
5spdcamaro
Tech / General Engine
1
Aug 28, 2015 02:12 AM
ezobens
DIY PROM
8
Aug 19, 2015 10:29 PM
redmaroz
LTX and LSX
7
Aug 16, 2015 11:40 PM
Dquickshift
Firebirds for Sale
0
Aug 12, 2015 06:21 PM




All times are GMT -5. The time now is 09:45 AM.