Need a stock clutch fork pivot ball for 1989 Camaro with T-5 Trans...Ordered on from Paddock for late 60 to 1989 Camaros, but the treads are not metric. GM has discontinued the stud, the fork and boot was not a problem..Anyone know a source for replacement??

 

i just had to re-set mine today . this time with loc-tite . i think you may have to hit the junk yards . LOL if the tranny is not seperated from bellhousing . 3/8 allen wrench .

 

I can not understand why it's so hard to find a new one. Dorman has one but it looks like a stud, with no ball. Are the threads standard in an older model Camaro Bell housing? Mine has two very large groves, and is basically trash...I bought a new GM fork and boot...

 

I'm pretty sure I've got a loose one lying on the workbench somewhere out in the garage that's in good shape. I pulled it out of a bellhousing at the junkyard a while back. If I can find it, I'll let ya know.

 

If your Pivot ball is trashed and need replacement. Here are the numbers V-8 #14036058 and V-6 # 15679715, GM replacemant... Goto www.gmpartsdirect.com ..