i need to buy a torque arm bracket but when i got to the dealer he said i need to know whether its a mb1 m49 or mk9 ? i believe...the tranny is an 87 2.8 t5 but how do i identify with no rpo codes?

------------------
Flowmaster 80 series, Random Technologies Cat, 3" intermediate pipe, SS
Hand Made Tips, 3 1/4" out, Accel 8.8 wires, MSD Coil, MSD Ignition Module,MSD 6A Box, Air Intake Temp Guage, Brushed Aluminum Hood Pins
Currently Working On:
T5 swap
Next to buy:
Slp dual cold air intake!
-------------------------
My Site:
www.geocities.com/firebird89white

" I'd rather run last in a full out race, than to NOT run at all ".

 

According to the '99 RPO book,

MK1 is a regular Borg Warner 5 speed
M49 is also a Borg Warner T-5, but wasn't supposed to be offered until 1988.
MK9 is listed as a Spicer 7 speed, are you sure he said MK9? Hope this helps.

------------------
If you live in Southeastern US, check us out!
South East Thirdgen


ASE Master Tech + L1
Savannah, GA

'87 Trans Am
S/D TPI retrofit including functional PassKey, 22# injectors,
JET AFPR, Ported Plenum,
TB Coolant Bypass,
SSM SFC, Boxed LCAs,
8mm Accel wires,
Flowmaster Exhaust,
16" GTA rims,
Corvette Servo,
KYB Shocks
-->14.97 @ 94.9 MPH<--

'97 Bonneville SSE

 

gmtech u have mail

------------------
Flowmaster 80 series, Random Technologies Cat, 3" intermediate pipe, SS
Hand Made Tips, 3 1/4" out, Accel 8.8 wires, MSD Coil, MSD Ignition Module,MSD 6A Box, Air Intake Temp Guage, Brushed Aluminum Hood Pins
Currently Working On:
T5 swap
Next to buy:
Slp dual cold air intake!
-------------------------
My Site:
www.geocities.com/firebird89white

" I'd rather run last in a full out race, than to NOT run at all ".