Is it worth it or not for a stall converter my mods are listed below and i will get vortech heads and sdpc manifold when available is it worth the time, work and money for my car or not
thanks

------------------
86 Irocz, 305 bored 40 over, 211/221 comp cam,paw rocker arms 1.5,10:1 comp., stock heads, 100 shot of nitrous,

soon to be airflow research 190 cc heads, 373 gears to replace 273, and induction work

and if so what stall would be good for the setup the cam i have pulls from about 3000 to about 6200

------------------
86 Irocz, 305 bored 40 over, 211/221 comp cam,paw rocker arms 1.5,10:1 comp., stock heads, 100 shot of nitrous,

soon to be airflow research 190 cc heads, 373 gears to replace 273, and induction work

2800? Sounds good for what you say your cam pulls at.

------------------
West Coast GM Shootout 2001!
1991 Camaro Z28
5.7L 5-Speed (originally 305)
13.25 @ 107.18 MPH
Southern California
Member: SoCal 3rd Gen F-Bodies
Webmaster: SoCal F-Bodies
-=ICON Motorsports=-

yea, 2800 sounds about right. Those 3.73's will help make the conv. more effective. Don't skimp on the conv. either, i've heard of people regretting doing so.

------------------
89 IROC-Z 350 TPI

-Flowmaster Catback
-Performance Resource Chip
-700R4 (Rebuilt) Too much done to actually list
-K&N Airfilters
-Ported Plenum
-2.77 Gears (not much to brag about but eh, its there)
-MSD 8.5 mm plug wires
-Problems every other day with the car (probably not a mod, but to me it sure makes a difference)