t5
Thread Starter
Member
iTrader: (2)
Joined: Oct 2008
Posts: 113
Likes: 0
From: Osceola IN
Car: 1989 Camaro RS
Engine: LO5 350
Transmission: 700r4
Axle/Gears: 3.42 posi
t5
what is needed for a complete t5 conversion? i have an rs that had a t5 before i bought it but there isnt anything really left. im just wondering what i need to get to put it back in thanks ty
Supreme Member
iTrader: (1)
Joined: Jul 2000
Posts: 1,290
Likes: 0
From: Carson, CA
Car: '88 GTA, 90 Formula
Engine: 5.7 TPI, fed growth hormones
Transmission: 700r4 4u2?
Axle/Gears: 9bolt
Re: t5
You'll need a V8 T5 & Bellhousing, clutch, flywheel, clutch actuation setup, pedals, shifter, console plate, and probably a yoke. I'm probably forgetting something else.
TA
Thread Starter
Member
iTrader: (2)
Joined: Oct 2008
Posts: 113
Likes: 0
From: Osceola IN
Car: 1989 Camaro RS
Engine: LO5 350
Transmission: 700r4
Axle/Gears: 3.42 posi
Re: t5
all that was left was the wiring and the clutch reservoir and the part that connects to the pedal
Member
iTrader: (1)
Joined: Feb 2009
Posts: 317
Likes: 1
From: Green Bay Wi
Car: 85 IROC / 69 Firebird convertible
Engine: 5.0 / 350
Transmission: t-5 / WC t-5
Axle/Gears: 3.27 / 3.08
Re: t5
sounds like what you need is a good parts car. Check your local salvage yards and good luck!
Thread Starter
Member
iTrader: (2)
Joined: Oct 2008
Posts: 113
Likes: 0
From: Osceola IN
Car: 1989 Camaro RS
Engine: LO5 350
Transmission: 700r4
Axle/Gears: 3.42 posi
Re: t5
ya i dont have the space to get a project car. if i could i would have had a 92 iroc last november but i dont have the space for anything
