drum to disc swap and a gear change ?'s
Thread Starter
Supreme Member
Joined: Jan 2001
Posts: 1,236
Likes: 0
From: Brockton, MA, USA
Car: 1983 Z28
Engine: 6.6L 406
Transmission: T-56
drum to disc swap and a gear change ?'s
getting my car back tomorrow with the new rear in it. It will have disc brakes and posi 3.42's. Will I notice better stoping power? I currently have 2.77's and one wheel will I notice a difference from the gear change?
------------------
I WOULD RATHER PUSH A CAMARO THAN DRIVE AN IMPORT
1983Z28 350w/ edelbrock performer RPM power package , dynomax shorty headers, 700R-4 with shift kit, 750cfm carb, edelbrock 3" exhaust system, ASCD SS hood, 16" IROC rims.
future mods:
completely done over suspension, black paint with flames, Hurst shifter, dakota digital gauge package, procharger supercharger.
------------------
I WOULD RATHER PUSH A CAMARO THAN DRIVE AN IMPORT
1983Z28 350w/ edelbrock performer RPM power package , dynomax shorty headers, 700R-4 with shift kit, 750cfm carb, edelbrock 3" exhaust system, ASCD SS hood, 16" IROC rims.
future mods:
completely done over suspension, black paint with flames, Hurst shifter, dakota digital gauge package, procharger supercharger.
Supreme Member
Joined: Jul 1999
Posts: 18,457
Likes: 16
From: Loveland, OH, US
Car: 4
Engine: 6
Transmission: 5
Which disks did you put in it?
If they're the 88-back ones, probably not; they will probably be worse than your drums, or at least they will be after a while. If they're the 89-up with the aluminum PBR calipers, they'll be a whole lot better.
------------------
"So many Mustangs, so little time..."
ICON Motorsports
If they're the 88-back ones, probably not; they will probably be worse than your drums, or at least they will be after a while. If they're the 89-up with the aluminum PBR calipers, they'll be a whole lot better.
------------------
"So many Mustangs, so little time..."
ICON Motorsports
Thread Starter
Supreme Member
Joined: Jan 2001
Posts: 1,236
Likes: 0
From: Brockton, MA, USA
Car: 1983 Z28
Engine: 6.6L 406
Transmission: T-56
worse than my drums? Why is that? It is from an 86 IROC. Is there a way to put the new ones on the old style? Can the rotors and the calipers just be swapped?
------------------
I WOULD RATHER PUSH A CAMARO THAN DRIVE AN IMPORT
1983Z28 350w/ edelbrock performer RPM power package , dynomax shorty headers, 700R-4 with shift kit, 750cfm carb, edelbrock 3" exhaust system, ASCD SS hood, 16" IROC rims.
future mods:
completely done over suspension, black paint with flames, Hurst shifter, dakota digital gauge package, procharger supercharger.
------------------
I WOULD RATHER PUSH A CAMARO THAN DRIVE AN IMPORT
1983Z28 350w/ edelbrock performer RPM power package , dynomax shorty headers, 700R-4 with shift kit, 750cfm carb, edelbrock 3" exhaust system, ASCD SS hood, 16" IROC rims.
future mods:
completely done over suspension, black paint with flames, Hurst shifter, dakota digital gauge package, procharger supercharger.
Supreme Member
Joined: Mar 2000
Posts: 13,414
Likes: 6
From: Central NJ, USA
Car: 1986 Firebird
Engine: 2.8 V6
Transmission: 700R4
You'll definately notice a difference going from 2.77 to 3.42!
------------------
-Tom P (Hot rodded 1986 Firebird 2.8l) from http://www.f-body.net/mailbag/3rd/3rd_mailbag.html message boards
---Think your car could be pic of the week? Visit http://www.f-body.net for details!
------------------
-Tom P (Hot rodded 1986 Firebird 2.8l) from http://www.f-body.net/mailbag/3rd/3rd_mailbag.html message boards
---Think your car could be pic of the week? Visit http://www.f-body.net for details!
Thread
Thread Starter
Forum
Replies
Last Post
hectre13
Engine/Drivetrain/Suspension Parts for Sale
2
Dec 11, 2023 08:14 AM
1992 Trans Am
Engine/Drivetrain/Suspension Parts for Sale
1
Aug 8, 2015 08:16 PM