What stall speed w/ this engine combo (info w/in)

Reply Subscribe

Thread Tools

Search this Thread

Jul 8, 2001 | 09:33 PM

Superblue87Formula

Thread Starter

Member

Joined: Dec 1999

Posts: 240

Likes: 0

From: Cincinnati, Ohio 45215

What stall speed w/ this engine combo (info w/in)

I have an L98, with a zz4 cam and performer rpm manifold, holley 750 carb, and may be adding a 150 shot of nitrous (forged pistons) before it's all said and done, what would be the best stall speed for street/strip (more strip)

Jul 9, 2001 | 10:37 PM

Jay 727

Senior Member

Joined: Jun 2001

Posts: 639

Likes: 0

From: FL

I could give you a sugestion if you provide the cam specs, rear gear ratio,etc.

Jul 10, 2001 | 07:03 AM

Superblue87Formula

Thread Starter

Member

Joined: Dec 1999

Posts: 240

Likes: 0

From: Cincinnati, Ohio 45215

oh yeah, sorry!

Gear: 3.27
ZZ4 Cam:
Hydraulic roller tappet
duratation @ .050 cam lift I:208 E:221
gross valve lift(1.5 ratio) I:474" E:510"
lash Zero/Zero
lobe centerline 112 degrees

Jul 10, 2001 | 09:40 AM

bbtaz97

Supreme Member

iTrader: (3)

Joined: Feb 2001

Posts: 1,375

Likes: 0

From: Winfield, IL

Car: 91 RS

Engine: 350tpi comming soon!

Transmission: fixed the 700r4 again!

i would say either 2500 or 3000 would be fine with your setup. just me opinoin though.

------------------
91 camaro RS
- 305 TBI
Mods: Performer TBI intake, 1" TBI spacer, K+N, jet fan switch ,160 thermo,Accel control module, Jet Stage 2 chip, edelbrock TES headers, Compleate 3" Flowmaster exhaust, Edelbrock springs, KYB struts and shocks, 700R4 built by TSI, SLP tq converter, b+m trans cooler, white guage faces, megashifter..
next month: spohn LCA's and panhard rod, BMR relocation brackets, 323 gear, lt1 cam , 350 heads