Swaping in a th350 from a 700r4
Thread Starter
Junior Member
Joined: Oct 2008
Posts: 40
Likes: 0
From: Montrose, MI
Car: 1989 camaro
Engine: 350 sbc
Transmission: 9" tail th350 B&M stage 2 shift kit
Axle/Gears: 4.10
Swaping in a th350 from a 700r4
I have been searching on here for some time about swapping in a th350 from my 700r4.
The parts i am going to buy is a th350 non lockup with a 9" tail housing so i can still use the stock driveshaft and a crossmember with the torqe arm mount on it like this one. http://www.umiperformance.com/catalo...apgmflvk4600c0.
I plan on keeping my stock torqe arm as well.
I dont know about all of you but to me this seems like the best way to put a th350 in my car. please tell me if there is any thing else i might need and what you think of how im doing this swap. thank you all for your time.
The parts i am going to buy is a th350 non lockup with a 9" tail housing so i can still use the stock driveshaft and a crossmember with the torqe arm mount on it like this one. http://www.umiperformance.com/catalo...apgmflvk4600c0.
I plan on keeping my stock torqe arm as well.
I dont know about all of you but to me this seems like the best way to put a th350 in my car. please tell me if there is any thing else i might need and what you think of how im doing this swap. thank you all for your time.
Thread
Thread Starter
Forum
Replies
Last Post
[CA] 700R4 trans & parts
6998poncho
Engine/Drivetrain/Suspension Parts for Sale
0
Sep 25, 2015 02:56 PM
