Transmissions and Drivetrain Need help with your trans? Problems with your axle?

i need some help

Thread Tools
 
Search this Thread
 
Old Sep 20, 2009 | 03:44 PM
  #1  
sparrino327's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2009
Posts: 8
Likes: 0
i need some help

i have a 1987 camaro 2.8l fuel injected v6 automatic tranny... the other day i just got the motor running good after sitting for a while... and i took it for a drive around the block and it shifted fine... my timing was off a lil so i brought it back to adjust it... now my car for some reason is stuck in low gear and the shifter wouldnt move it so i went under the car and manually shifted it.. but it still wont go into any other gear.... i have no idea what happened...does anyone think i need to rebuild???? please let me know if you have any ideas
Reply
Old Sep 21, 2009 | 09:27 AM
  #2  
taonindo's Avatar
Banned
 
Joined: Jun 2004
Posts: 405
Likes: 2
Car: 82 firebird
Engine: 406
Re: i need some help

sounds like you need to pull the pan and take a look. whats the condition of the fluid? its been sitting a while but how long is a while?
Reply
Old Sep 21, 2009 | 04:00 PM
  #3  
sparrino327's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2009
Posts: 8
Likes: 0
Re: i need some help

Originally Posted by taonindo
sounds like you need to pull the pan and take a look. whats the condition of the fluid? its been sitting a while but how long is a while?
its been sitting a couple months and when i bought the car i checked the fluid and it looked and smelled fine but it was a quart low... i put the quart in it and it was shifting fine... not no more
Reply




All times are GMT -5. The time now is 07:52 PM.