HoppinHollyLT87
Junior Member
close
Oct 18, 2014
- Join DateFeb 2008
- LocationRaleigh, NC
- Posts:4
- iTrader Positive Feedback0
- iTrader Feedback Score(0)
- Car1987 Camaro LT
- Engine305 c.i. 4BBL.. Edelbrock AFB
- TransmissionOriginal 700-R4... supposedly
- Axle/GearsI'm not sure, stock 2.73 open?
- Likes:0
- Liked:0 Times in 0 Posts
I'm thoroughly confused. My trans filter isn't right. Gasket for a 700r4 is correct but the filter is wrong. I looked through pictures online and the filter I pulled out looks identical to a 200 4r filter. Also unusually has an o-ring for a gasket instead of the typical tube gasket on a regular 700r4 filter. Anybody with some insight?
HoppinHollyLT87
Junior Member
close
Oct 18, 2014
- Join DateFeb 2008
- LocationRaleigh, NC
- Posts:4
- iTrader Positive Feedback0
- iTrader Feedback Score(0)
- Car1987 Camaro LT
- Engine305 c.i. 4BBL.. Edelbrock AFB
- TransmissionOriginal 700-R4... supposedly
- Axle/GearsI'm not sure, stock 2.73 open?
- Likes:0
- Liked:0 Times in 0 Posts
Also note is should be the original transmission. I obtained it with 130k and its only up to 137k now. Tag id#: 7YPM079C
HoppinHollyLT87
Junior Member
close
Oct 18, 2014
- Join DateFeb 2008
- LocationRaleigh, NC
- Posts:4
- iTrader Positive Feedback0
- iTrader Feedback Score(0)
- Car1987 Camaro LT
- Engine305 c.i. 4BBL.. Edelbrock AFB
- TransmissionOriginal 700-R4... supposedly
- Axle/GearsI'm not sure, stock 2.73 open?
- Likes:0
- Liked:0 Times in 0 Posts
Well I can't find an answer to this weird conundrum so I bought the filter kit for the 200-4R. Anybody hear of this or seen this at all? Its quite strange.
HoppinHollyLT87
Junior Member
close
Oct 18, 2014
- Join DateFeb 2008
- LocationRaleigh, NC
- Posts:4
- iTrader Positive Feedback0
- iTrader Feedback Score(0)
- Car1987 Camaro LT
- Engine305 c.i. 4BBL.. Edelbrock AFB
- TransmissionOriginal 700-R4... supposedly
- Axle/GearsI'm not sure, stock 2.73 open?
- Likes:0
- Liked:0 Times in 0 Posts
-bump- Nobody have anything?
Quote:
Also unusually has an o-ring for a gasket instead of the typical tube gasket on a regular 700r4 filter. Anybody with some insight?
Not for a 4L60E is is it ?Originally Posted by HoppinHollyLT87
My trans filter isn't right.Also unusually has an o-ring for a gasket instead of the typical tube gasket on a regular 700r4 filter. Anybody with some insight?
I got given one from the parts shop for a 4L60E and it was different to the T700 / 4L60 filter I had
Quote:
T700/ 4L60 /4L60E are all the same trans with the E having computer control of the shiftsOriginally Posted by HoppinHollyLT87
Gasket for a 700r4 is correct