700R slip
Thread Starter
Junior Member
Joined: Jun 2010
Posts: 20
Likes: 0
From: Stoney Creek, Ontario, Canada
Car: 88 Iroc Convertible
Engine: 305 TPI
700R slip
After a hard acceleration, my tranny will no longer engage, I go through all gears including reverse but there is no gear shifting and very little movement from the car.
I can get the car to move a little but I am pushing the car to over 3500rpm.
If the tranny ends up needing to be replaced is there any type of upgrade I should consider? Any suggestions or positive comments will be appreciated.
I can get the car to move a little but I am pushing the car to over 3500rpm.
If the tranny ends up needing to be replaced is there any type of upgrade I should consider? Any suggestions or positive comments will be appreciated.
Supreme Member
iTrader: (2)
Joined: Sep 2009
Posts: 1,591
Likes: 5
From: WI.
Car: 1987 iroc
Engine: 383 TPIS intake, Dyno Don headers
Transmission: 700R4 w/Pro-built Auto/transgo 2-3
Axle/Gears: 3.27/3.70 borg warner 9 bolt
Re: 700R slip
If it's just a Daily driver or not driven often with a stock motor, have it rebuilt or buy a salvage yard used one. A high HP built tranny will run you $2500-$3000
Thread
Thread Starter
Forum
Replies
Last Post
UltRoadWarrior9
Transmissions and Drivetrain
3
Sep 2, 2015 08:24 PM