LT1 Flwheel Question
Thread Starter
Junior Member
Joined: Dec 2010
Posts: 19
Likes: 0
From: Southern Ont. Can
Car: A little OT, with Camaro drivetrain
Engine: 350
Transmission: T56
Axle/Gears: 4:11s
LT1 Flwheel Question
Will my LT1 flywheel bolt onto an LT1 crank/short block that previously had a flexplate ?
By which I mean will the balance still be correct, or are the flexplate engines somehow different to the flywheel engines?
Thanks
By which I mean will the balance still be correct, or are the flexplate engines somehow different to the flywheel engines?
Thanks
Supreme Member
Joined: Jul 2007
Posts: 1,293
Likes: 5
From: Howard Lake, MN
Car: 86 Camaro
Engine: 355- hopefully a 5.3 this summer
Transmission: 700r4
Axle/Gears: 3.42
Re: LT1 Flwheel Question
yes... it will bolt right up to -any- 87 and newer gen1 or gen2 small block or 4.3 V6 and have the correct balance.
but you really should get the proper longer bolts for it if you don't want it to fly off..
but you really should get the proper longer bolts for it if you don't want it to fly off..
Last edited by novaderrik; Aug 1, 2015 at 11:37 PM.
Thread
Thread Starter
Forum
Replies
Last Post