94 4L60E - Is this missing a solenoid?
Thread Starter
Senior Member
Joined: Feb 2009
Posts: 874
Likes: 18
From: Brisbane, Australia
Car: 1985 Pontiac TransAM
Engine: 400SBC 24x conversion
Transmission: T700r Stage2 Shiftkitted
Axle/Gears: 2.77 9 Bolt
94 4L60E - Is this missing a solenoid?
Hi All,
I just took the pan off a 94 LT1 corvette 4L60E to check for deposits in the pan and filter, and it looks like there's a hole where a solenoid or valve would go.
There's no spare connector from the harness, but it just looked out of place and weird.
Can anyone confirm if something's missing or should be there, or if this is completely normal?
Thanks.
I just took the pan off a 94 LT1 corvette 4L60E to check for deposits in the pan and filter, and it looks like there's a hole where a solenoid or valve would go.
There's no spare connector from the harness, but it just looked out of place and weird.
Can anyone confirm if something's missing or should be there, or if this is completely normal?
Thanks.
Last edited by evilstuie; Nov 7, 2017 at 04:20 AM.