Shifter Cable Pin
#1
Member
Thread Starter
Join Date: Jun 2017
Location: Illinois
Posts: 143
Received 0 Likes
on
0 Posts
Car: '89 Iroc
Engine: 383 TPI
Transmission: Built 700R4
Axle/Gears: 9 Bolt - 3.45
Shifter Cable Pin
Must have knocked the pin or whatever was there out, where the cable connects to the shifter, when installing carpet last weekend.
Does anyone know what exactly should be there or part number? Right now I bent a nail to move it in and out of garage while working on it today, otherwise will just get a small bolt and lock nut and should be good enough.
Does anyone know what exactly should be there or part number? Right now I bent a nail to move it in and out of garage while working on it today, otherwise will just get a small bolt and lock nut and should be good enough.
#3
Supreme Member
iTrader: (1)
Join Date: Sep 2005
Posts: 26,046
Received 1,668 Likes
on
1,266 Posts
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
Re: Shifter Cable Pin
Or, one of those "hairpin" clips you can get at a hardware store, like this, except in whatever size that hole is. https://www.homedepot.com/p/Everbilt...9608/204276625 Which I think that's kinda what it was from the factory.