We have a distributer wrench to losen the distrubuter one end is 9/16 and the other is half inch.. neither well fit on, how the hell am i gonna do this?

POs i need to adjust the timing its 6 deg its gotta be 10 deg.
thanks

Probably a 15mm. If not, try a 13mm.

15mm or 17mm
How to do this.
Easy.
Sears
Craftsman Swivel end socket on ends of several long extensions
It can only be easily done this way.

15mm

ked...dale...and cali are right...i'll just chime in to say 15mm myself...i did it with a swivel head ratchet...1 6 inch extension and that 15 mm swivel head socket...put the extension + socket on bolt first...clip in ratchet and turn a couple times just until you feel a slight drag on distributor...but can move it...then time away...also don't forget to disconnect the EST...

buy a 15mm box wrench and cut it in half (cut of the open end wrench side) and keep it in your tool box just for this purpose

O------C O---/---C = O--- Makes life easy.

W-m sells the "shortie" wrench set for 15-17 bux, thats what I do mine with. Works great, and you get from 10 to 17 I belive