HELP? tc question
Thread Starter
Supreme Member
Joined: Oct 2001
Posts: 1,391
Likes: 0
From: Halifax, Nova Scotia Canada
Car: 1986 Camaro SC
Axle/Gears: 3.42
HELP? tc question
ok, heres the question cn you use a tc out of an 84 v6 camaro in a 85+ v6 camaro,
cause i thought the 82-84 had the 200C, would the tc be the same?
cause i thought the 82-84 had the 200C, would the tc be the same?
Supreme Member
Joined: Mar 2000
Posts: 13,414
Likes: 6
From: Central NJ, USA
Car: 1986 Firebird
Engine: 2.8 V6
Transmission: 700R4
The 700r4 received a stronger input shaft (more splines) in 1985, so you can't use an 84 700r4 torque convertor. As for putting a 200C torque convertor on (82-83 v6), I'd imagine you'd also have to change the input shaft out (trans rebuild).
Trans timeline:
82: V6 and V8 = 200C
83: V8 = 700r4, V6 = 200C
84: V6 and V8 = 700r4
85-92: All 700r4
So that '84 you're looking at should have a 700r4, unless the 3speed metric 200C POS somehow wound up in there.
Trans timeline:
82: V6 and V8 = 200C
83: V8 = 700r4, V6 = 200C
84: V6 and V8 = 700r4
85-92: All 700r4
So that '84 you're looking at should have a 700r4, unless the 3speed metric 200C POS somehow wound up in there.
Thread
Thread Starter
Forum
Replies
Last Post