Jet Pulley's
Thread Starter
Junior Member
Joined: Jan 2001
Posts: 89
Likes: 0
From: Maryland
Jet Pulley's
I just ordered my pulley's and i was wondering if you guys that have a 3.1 W/ A/C could tell me what belt you guys had to use? The summit rep said that there's a shorter and larger one. Oh and also how hard is it to install an elec. Trans temp gauge?
------------------
1992 RS 3.1L
Rebuilt Tranny W/
Trans-Go Shift Kit
B&M MegaShifter
B&M Super TransCooler
ES Trans Mount
Dual Snorkel Intake
W/ K&N'S & Custom Ram Air
Flowmaster Exhaust
Accel 300+ Ignition(On The Way) 8.8mm Wires, Cap/Rotor And Elec. Coil
160* Thermostat
Jet Underdrive Pulley's(On The Way)
1 12" - JL W6 (Loud)
Eclipse 2-Channel Amp
Sony Head Unit
Window Tint 20%
'92 Z28 Wheels W/245-50-16's
Check It Out In The Readers Rides Section Under: PimpRide92
Planing ZZ4 Swap!
Kill's:
80's Stang 4-Cyl, A few Ricers, Ford Tempo(Weak)
'91 OR '92 Z28(Dont Ask Me How) All On A Mesh Up Tranny! 4th Gen 3.4, Cutlas Ciera 3.8,80's V6 Thunderbird,'95 Honda Prelude(2 Fat Guys In It)
'86 IROC-Z 305TPI(My friend said he only had it at 3/4 throttle but he had it pinned and i started pulling in 2nd gear)
------------------
1992 RS 3.1L
Rebuilt Tranny W/
Trans-Go Shift Kit
B&M MegaShifter
B&M Super TransCooler
ES Trans Mount
Dual Snorkel Intake
W/ K&N'S & Custom Ram Air
Flowmaster Exhaust
Accel 300+ Ignition(On The Way) 8.8mm Wires, Cap/Rotor And Elec. Coil
160* Thermostat
Jet Underdrive Pulley's(On The Way)
1 12" - JL W6 (Loud)
Eclipse 2-Channel Amp
Sony Head Unit
Window Tint 20%
'92 Z28 Wheels W/245-50-16's
Check It Out In The Readers Rides Section Under: PimpRide92
Planing ZZ4 Swap!
Kill's:
80's Stang 4-Cyl, A few Ricers, Ford Tempo(Weak)
'91 OR '92 Z28(Dont Ask Me How) All On A Mesh Up Tranny! 4th Gen 3.4, Cutlas Ciera 3.8,80's V6 Thunderbird,'95 Honda Prelude(2 Fat Guys In It)
'86 IROC-Z 305TPI(My friend said he only had it at 3/4 throttle but he had it pinned and i started pulling in 2nd gear)
Member
Joined: Sep 2001
Posts: 360
Likes: 0
It tells you in the instructions.
------------------
1992 ext cab S10
173 on NOS, 5153Nos,Black Magic,2030 Crane Cam,11mm Moroso Wires, MSD 6al, MSD Blaster Coil,K&N,Holley Tbi, Edelbrock Headers,40 series Delta Flow,Zexel,Toms 28 spline axles,Hypertech chip, Granetelli 190 lph, Centerforce Dual Friction,Jet pulleys,Spray Bed Liner, Altezzas,Pioneer din 1/2, 01 Vette wheels, Harwood 4 inch hood, and Much more...
------------------
1992 ext cab S10
173 on NOS, 5153Nos,Black Magic,2030 Crane Cam,11mm Moroso Wires, MSD 6al, MSD Blaster Coil,K&N,Holley Tbi, Edelbrock Headers,40 series Delta Flow,Zexel,Toms 28 spline axles,Hypertech chip, Granetelli 190 lph, Centerforce Dual Friction,Jet pulleys,Spray Bed Liner, Altezzas,Pioneer din 1/2, 01 Vette wheels, Harwood 4 inch hood, and Much more...
Thread
Thread Starter
Forum
Replies
Last Post
bigjay89gta
Engine/Drivetrain/Suspension Parts for Sale
12
Oct 15, 2015 08:04 AM