Third Generation F-Body Message Boards
Share Your Pictures with Our Community. Upload Now
0 2020/09/10 19:39:16
0 2020/09/10 18:55:26
0 2020/09/10 18:15:00
0 2020/09/10 18:14:31
0 2020/09/10 18:13:50
0 2020/09/10 18:13:18
0 2020/09/10 18:01:53
0 2020/09/10 18:01:28
0 2020/09/10 18:00:20
0 2020/09/10 17:38:58
0 2020/09/10 17:36:37
0 2020/09/10 17:36:00
Advertisement
0 2020/09/10 17:34:19
0 2020/09/10 17:32:21
0 2020/09/10 17:30:47
I also installed a wireless charger for my phone.
I also installed a wireless charger for my phone.
0 2020/09/10 16:56:50
Final product, Got my new shifter plate and boot from Hawks, as well as the 6-speed sticker.
Final product, Got my new shifter plate and boot from Hawks, as well as the 6-speed sticker.
0 2020/09/10 16:56:46
to get it in position I had to reach under the radio and push up as I got the screws tight
to get it in position I had to reach under the radio and push up as I got the screws tight
0 2020/09/10 16:56:23
Final mounting, Its hard against the screw holes on both sides and its still a snug fit
Final mounting, Its hard against the screw holes on both sides and its still a snug fit
0 2020/09/10 16:56:19
pro-tip, when putting the dashpad screws in, lay a towel down so you don't drop the screws in your carpet
pro-tip, when putting the dashpad screws in, lay a towel down so you don't drop the screws in your carpet
0 2020/09/10 16:56:16
all the wires tucked up
all the wires tucked up
0 2020/09/10 16:55:40
The view from the front
The view from the front
0 2020/09/10 16:55:36
Here is the detector with the mirror mount, and the front dash cam installed. I'm waiting until I can get new back window tint before mounting the back camera
Here is the detector with the mirror mount, and the front dash cam installed. I'm waiting until I can get new back window tint before mounting the back camera
0 2020/09/10 16:55:24
0 2020/09/10 16:54:45
keeps the wires nice and tight going up the a-pillar, I have a lot of wires here due to the triple gauge pillar
keeps the wires nice and tight going up the a-pillar, I have a lot of wires here due to the triple gauge pillar
0 2020/09/10 16:54:42
I use this for network wire bundling, its really helpful in cars as well.
I use this for network wire bundling, its really helpful in cars as well.
0 2020/09/10 16:54:40
drop the wires down in the middle to test fit
drop the wires down in the middle to test fit
0 2020/09/10 16:53:45
Up the a-pillar and then tuck all the extra wires into the head liner
Up the a-pillar and then tuck all the extra wires into the head liner
0 2020/09/10 16:53:35
0 2020/09/10 16:52:42
0 2020/09/10 16:52:29
at the top, clip it to the dash side
at the top, clip it to the dash side
0 2020/09/10 16:52:26
After you tap the fuses pull the wires to above the hood release and into the trim outside the dash. I ran it on the outside of the trim, there is tons of room.
After you tap the fuses pull the wires to above the hood release and into the trim outside the dash. I ran it on the outside of the trim, there is tons of room.
0 2020/09/10 16:52:22
Advertisement