Third Generation F-Body Message Boards
0 2024/10/14 11:03:16
I believe this compressor bolts up to factory lines
I believe this compressor bolts up to factory lines
0 2024/10/14 11:02:41
I made 226HP at 5252 Through stock manifolds so yes it's possible, L30 or 31 heads and a decent cam and you can pull 290
I made 226HP at 5252 Through stock manifolds so yes it's possible, L30 or 31 heads and a decent cam and you can pull 290
0 2024/04/22 12:43:35
My LB9 305 stock bottom end 226HP and 270ft.lbs modifications= L30 head, 420/440 lift cam, Holley stealth ram, ev flash 2
My LB9 305 stock bottom end 226HP and 270ft.lbs modifications= L30 head, 420/440 lift cam, Holley stealth ram, ev flash 2
0 2024/04/22 12:28:57
Would this work it's .96 a/r turbine and a 4 inch inlet with 3 inch outlet compressor.
Would this work it's .96 a/r turbine and a 4 inch inlet with 3 inch outlet compressor.
0 2020/10/09 09:11:41
0 2019/11/19 16:09:14
0 2019/10/06 20:06:59
0 2019/10/06 20:05:29
0 2019/10/06 20:04:34
0 2019/10/06 17:31:27
0 2019/08/17 13:46:28
305 Stealth Ram with vortec 520 heads
305 Stealth Ram with vortec 520 heads
0 2019/08/14 02:53:37
0 2019/07/29 11:55:58
0 2019/07/29 11:54:48
But like I said believe what you want to but isn't it funny that everyone said the stealth ram is overkill for a 305 but Super Chevy did it and pulled 372hp. Also Rick at Crackaway racing engines in California built a 355hp stealth ram 305 but if you still believe it is impossible fine. Yes it makes a little less torque but I'm also trying not to grenade my t5 until I get my tremec
But like I said believe what you want to but isn't it funny that everyone said the stealth ram is overkill for a 305 but Super Chevy did it and pulled 372hp. Also Rick at Crackaway racing engines in California built a 355hp stealth ram 305 but if you still believe it is impossible fine. Yes it makes a little less torque but I'm also trying not to grenade my t5 until I get my tremec
0 2019/07/03 12:44:57
So with my tiny flat tappet cam using 520 305 vortec heads I'll be making 353Whp and 356 wft.lbs.
So with my tiny flat tappet cam using 520 305 vortec heads I'll be making 353Whp and 356 wft.lbs.
0 2019/07/03 11:49:03
0 2019/07/03 11:47:39
It's my stealth ram 305
It's my stealth ram 305
0 2019/07/03 11:46:41
The top photo should be the closest to your engine I could find
The top photo should be the closest to your engine I could find
0 2019/05/15 12:10:00
0 2019/03/05 04:29:17
0 2019/03/05 04:29:02
New hood
New hood
0 2019/02/28 08:54:56
Fully built vortec 520's they flow 234 cfm at .500 lift this head with a stealth ram and my 204/214 .420/.440 lift cam will make 342 horsepower at the crank
Fully built vortec 520's they flow 234 cfm at .500 lift this head with a stealth ram and my 204/214 .420/.440 lift cam will make 342 horsepower at the crank
0 2019/02/28 08:34:13
0 2019/02/28 08:30:08
0 2019/02/28 08:12:05
0 2019/02/28 08:08:58
0 2019/02/28 08:00:46
0 2019/02/28 08:00:01
0 2019/02/28 07:58:29
0 2019/02/28 07:57:12
0 2019/02/27 17:41:51
0 2019/02/27 16:44:31
0 2019/02/27 16:43:01
0 2019/02/27 16:42:45
0 2019/02/27 16:42:13
0 2019/02/27 16:41:36
0 2019/02/27 16:41:06
0 2019/02/27 16:40:32
0 2019/02/27 16:40:12
0 2019/02/27 16:39:53