Third Generation F-Body Message Boards
0 2024/06/23 14:55:58
0 2024/06/23 14:56:05
Success 🥳 Thats a 4x4 on ground and still 4 more inches of clearance above that once everything back in maybe 5-6 inches of ground clearance
Success 🥳 Thats a 4x4 on ground and still 4 more inches of clearance above that once everything back in maybe 5-6 inches of ground clearance
0 2024/06/23 14:56:12
0 2024/06/23 14:56:23
Slow progress but still getting closer down to wiring and installing the interior
Slow progress but still getting closer down to wiring and installing the interior
0 2024/09/01 15:09:42
0 2024/09/01 15:09:52
0 2024/09/01 15:10:03
0 2024/09/01 15:10:13
0 2024/09/01 15:10:21
Relocated fuel pump harness up to clear the exhaust pipe,just made a tape template of original hole and cut
Relocated fuel pump harness up to clear the exhaust pipe,just made a tape template of original hole and cut
0 2024/09/14 10:29:15
I didn't want to run another line to front of car for evap canister so used a foxbody mustang one.I trimmed the bracket and mounted it behind filler neck
I didn't want to run another line to front of car for evap canister so used a foxbody mustang one.I trimmed the bracket and mounted it behind filler neck
0 2024/09/14 10:29:23
And with factory cover its out of site and protected just need to run a short metal line from tank to it
And with factory cover its out of site and protected just need to run a short metal line from tank to it
0 2024/09/14 10:29:31
0 2024/09/20 15:11:19
0 2024/10/04 15:58:53
Headlight assembly repainted and put back together I used the new motors from ebay $43 each.They seem great running off a battery they go up and down perfectly no noise or binding.
Headlight assembly repainted and put back together I used the new motors from ebay $43 each.They seem great running off a battery they go up and down perfectly no noise or binding.
0 2024/10/04 15:59:02
Any idea where this broken wire goes? Im sure its a ground wire but Im not finding the other end in harness. This is the plug that plugs into the extension at bottom of wiper motor. Thanks
Any idea where this broken wire goes? Im sure its a ground wire but Im not finding the other end in harness. This is the plug that plugs into the extension at bottom of wiper motor. Thanks
0 2024/10/06 14:38:32
0 2024/10/13 09:21:09
0 2024/10/13 09:21:18
Made up a bracket to hold the early 90's f150 coolant & washer tank .Waiting on the foxbody hood adjusters to come in and those will get mounted lower on plate
Made up a bracket to hold the early 90's f150 coolant & washer tank .Waiting on the foxbody hood adjusters to come in and those will get mounted lower on plate
0 2024/10/13 09:21:25
0 2024/10/13 11:34:30
0 2024/10/13 11:34:38
0 2024/10/13 11:34:45
0 2024/10/13 11:34:50
0 2024/10/13 12:03:03
Interior is back in and this is how the rear seat looks with the modified floors for the flowmasters. Looks normal to me 😁
Interior is back in and this is how the rear seat looks with the modified floors for the flowmasters. Looks normal to me 😁
0 2024/10/13 12:03:11
0 2024/10/13 12:03:19
0 2024/10/26 16:41:11
0 2024/11/03 08:14:47
0 2024/11/03 08:14:55
I deleted my a/c and have the heater only box on my car and also changed to the early style engine accessories. I couldn't get past the look of the compressor just sitting there or the delete pulley.
I deleted my a/c and have the heater only box on my car and also changed to the early style engine accessories. I couldn't get past the look of the compressor just sitting there or the delete pulley.
0 2024/11/04 16:52:49