Third Generation F-Body Message Boards
Haggard bird
Haggard bird
0 2019/06/20 21:03:01
Maroon nose from cosmetic accident
Maroon nose from cosmetic accident
0 2019/06/20 21:03:10
Maroon passenger side fender
Maroon passenger side fender
0 2019/06/20 21:03:19
Vin 8 for L98
Vin 8 for L98
0 2019/06/20 21:03:27
Wrecked interior
Wrecked interior
0 2019/06/20 21:03:35
Rusted primer roof
Rusted primer roof
0 2019/06/20 21:03:42
0 2019/06/20 21:03:50
This hatch has tried to kill me twice
This hatch has tried to kill me twice
0 2019/06/20 21:03:59
Rust primer and neglect
Rust primer and neglect
0 2019/06/20 21:04:06
Original drivers fender
Original drivers fender
0 2019/06/20 21:04:13
6spd manual with the sport package. 2000-3000 hard top twin turbo cars made it to this country from 2008-2010. Actually rare.
6spd manual with the sport package. 2000-3000 hard top twin turbo cars made it to this country from 2008-2010. Actually rare.
0 2019/06/20 22:01:00
Rust free southern car originally a 2.8 automatic. Looks stock, Rips all 4. Makes no power below 4500.
Rust free southern car originally a 2.8 automatic. Looks stock, Rips all 4. Makes no power below 4500.
0 2019/06/20 22:06:56
Precious owner at some point used an AN fitting t to tee the brake booster into the PCV or give versa to a vacuum feed on the intake. Is this factory? I removed it and left the PCV open to atmosphere for now. Ran brake booster right to the manifold since check valve sits in booster itself.
Precious owner at some point used an AN fitting t to tee the brake booster into the PCV or give versa to a vacuum feed on the intake. Is this factory? I removed it and left the PCV open to atmosphere for now. Ran brake booster right to the manifold since check valve sits in booster itself.
0 2019/06/21 09:26:25
0 2019/06/21 09:26:31
Going to need a new MAF. The pins on the harness side are nice and tarnished also. Will have to fix that.
Going to need a new MAF. The pins on the harness side are nice and tarnished also. Will have to fix that.
0 2019/06/21 09:28:43
Ripped out the smog pump, EGR setup and picked up the dayco belt to reroute around the now removed useless garbage. Makes working on the passenger side much easier. Looks cleaner too. Going to cap the header valves after they soak in PB blaster.
Ripped out the smog pump, EGR setup and picked up the dayco belt to reroute around the now removed useless garbage. Makes working on the passenger side much easier. Looks cleaner too. Going to cap the header valves after they soak in PB blaster.
0 2019/06/21 09:29:44
0 2019/06/22 09:24:48
0 2019/06/22 09:24:57
No more death risk.
No more death risk.
0 2019/06/22 09:27:16
Large hole..... way too big.
Large hole..... way too big.
0 2019/06/22 09:42:04
So you change the fuel pump...... but leave all the new bits required in the bag? Corbit clamps, in tank line, insulator, new O-ring.... and leave ancient rotted feed hoses from the metal lines on assembly to body lines..... 🤷🏻‍♂️😑
So you change the fuel pump...... but leave all the new bits required in the bag? Corbit clamps, in tank line, insulator, new O-ring.... and leave ancient rotted feed hoses from the metal lines on assembly to body lines..... 🤷🏻‍♂️😑
0 2019/06/22 09:42:12
Wasn’t even clamped on the pipe
Wasn’t even clamped on the pipe
0 2019/06/22 10:37:52
🤮
🤮
0 2019/06/22 10:38:00
0 2019/06/22 10:38:06
0 2019/06/22 10:38:09
0 2019/06/22 10:38:13
0 2019/06/22 10:38:45
0 2019/06/22 10:38:51
0 2019/06/22 10:38:55
0 2019/06/22 10:38:58
Smog delete belt with routing. Thanks third gen tech articles!
Smog delete belt with routing. Thanks third gen tech articles!
0 2019/06/22 13:18:20
Feed and return connected for now later will seal this stupid hack setup as proper as possible. Eventually I want a new pump setup with proper hard lines or to at least flare these and offset them. Ugh.
Feed and return connected for now later will seal this stupid hack setup as proper as possible. Eventually I want a new pump setup with proper hard lines or to at least flare these and offset them. Ugh.
0 2019/06/22 13:18:29
MAF and vacuum hoses connected proper with help from y’all. Thanks again. Would have missed giant vacuum port under plastic cover over distributor
MAF and vacuum hoses connected proper with help from y’all. Thanks again. Would have missed giant vacuum port under plastic cover over distributor
0 2019/06/22 13:18:34
0 2019/06/22 15:13:58
Loads of gas up the stick.
Loads of gas up the stick.
0 2019/06/22 16:35:19
New ground cable and ground check for resistance unloaded at the new sandwich chassis ground all clean.
New ground cable and ground check for resistance unloaded at the new sandwich chassis ground all clean.
0 2019/06/24 08:31:31
Battery negative to alternator casing unloaded
Battery negative to alternator casing unloaded
0 2019/06/24 08:31:40
Battery voltage at ancient gauge with key switched to on.
Battery voltage at ancient gauge with key switched to on.
0 2019/06/24 08:31:47
SHINY AND CHROME!
SHINY AND CHROME!
0 2019/06/24 08:31:54
Factory oil cooler and heat exchanger.
Factory oil cooler and heat exchanger.
0 2019/06/24 08:37:12