Third Generation F-Body Message Boards
Water pump in!
Water pump in!
0 2021/06/03 16:40:48
Wut are you? Help TL
Wut are you? Help TL
0 2021/06/03 16:41:48
Same question? I was delinquent in tagging.
Same question? I was delinquent in tagging.
0 2021/06/03 16:42:36
0 2021/06/03 16:43:49
Crank pulley in
Crank pulley in
0 2021/06/03 16:45:15
And water pump pulley
And water pump pulley
0 2021/06/03 16:46:09
0 2021/06/03 16:47:24
Coming together
Coming together
0 2021/06/03 16:48:05
0 2021/06/03 16:48:47
0 2021/06/03 16:51:18
Used an old stud and cut down a sleeve to position bracket close to where it used to sit in space.
Used an old stud and cut down a sleeve to position bracket close to where it used to sit in space.
0 2021/06/05 04:02:09
Wized off the bracket for header clearance.
Wized off the bracket for header clearance.
0 2021/06/05 04:04:33
Should do the job
Should do the job
0 2021/06/05 04:07:01
0 2021/06/06 16:21:40
0 2021/06/06 16:22:25
Found this on line, and plugged the dam, along with one of the OEM brackets!!
Found this on line, and plugged the dam, along with one of the OEM brackets!!
0 2021/06/06 16:26:18
0 2021/06/06 16:27:41
Mounted the rest of the non-bracket challenged hardware
Mounted the rest of the non-bracket challenged hardware
0 2021/06/06 16:28:19
0 2021/06/06 16:29:29
Its about a finger and a half
Its about a finger and a half
0 2021/06/07 04:42:50
Installed the era correct shifter plate! Makes TLS happy.
Installed the era correct shifter plate! Makes TLS happy.
0 2021/06/07 15:58:19
0 2021/06/07 15:59:21
Pressure washed the nose, found some unexpected corrosion
Pressure washed the nose, found some unexpected corrosion
0 2021/06/07 16:03:01
0 2021/06/07 16:04:53
All is not lost, I found a used replacement on Ebay for less than 70 bucks! It's on the way.
All is not lost, I found a used replacement on Ebay for less than 70 bucks! It's on the way.
0 2021/06/07 16:05:17
This guy showed up just after noon! Looks real functional.
This guy showed up just after noon! Looks real functional.
0 2021/06/07 16:06:56
0 2021/06/07 16:08:15
Made up a couple of clamps to secure everything, Sweet!!
Made up a couple of clamps to secure everything, Sweet!!
0 2021/06/07 16:12:17
6061 T6 Aluminum, welds are impressive.
6061 T6 Aluminum, welds are impressive.
0 2021/06/07 16:13:25
There is going to be a fire in the hole tomorrow!
There is going to be a fire in the hole tomorrow!
0 2021/06/07 16:14:29
0 2021/06/10 17:05:08
0 2021/06/10 17:06:34
0 2021/06/10 17:15:30
0 2021/06/10 17:17:05
Hooked up PCV temporarily, and added my new goose-neck, sits a little higher than OEM, and you can point it wherever you want. Gets the hose off the bracket, looks a lot better.
Hooked up PCV temporarily, and added my new goose-neck, sits a little higher than OEM, and you can point it wherever you want. Gets the hose off the bracket, looks a lot better.
0 2021/06/11 16:18:28
0 2021/06/11 16:25:00
0 2021/06/13 16:59:35
0 2021/06/13 17:00:09
Prime and crank just under 20 psi
Prime and crank just under 20 psi
0 2021/06/13 17:01:08
Tidied up the loom, and applied the 303 Aerospace treatment. Amazing stuff, check out the radiator hose and the windshield wiper motor plastic, rubbed in 8 hours ago, and still looks moist and happy!
Tidied up the loom, and applied the 303 Aerospace treatment. Amazing stuff, check out the radiator hose and the windshield wiper motor plastic, rubbed in 8 hours ago, and still looks moist and happy!
0 2021/06/13 17:04:37