Third Generation F-Body Message Boards
Not sure what this was for.
Not sure what this was for.
0 2023/09/26 23:45:53
Bondo on spoiler corner sanded out.
Bondo on spoiler corner sanded out.
0 2023/09/26 23:45:55
Bondo on passenger ground effect sanded out.
Bondo on passenger ground effect sanded out.
0 2023/09/26 23:45:56
Staged and ready for 2 more coats of epoxy.
Staged and ready for 2 more coats of epoxy.
0 2023/09/26 23:45:58
Ground effects and center spoiler.
Ground effects and center spoiler.
0 2023/09/26 23:46:00
Spoiler corners and door ground effects.
Spoiler corners and door ground effects.
0 2023/09/26 23:46:01
2 more coats of epoxy on them. Still trying to get the hang of this new gun and larger tip so had a couple runs but they'll sand out.
2 more coats of epoxy on them. Still trying to get the hang of this new gun and larger tip so had a couple runs but they'll sand out.
0 2023/09/26 23:52:53
Passenger front, no more missing chunk.
Passenger front, no more missing chunk.
0 2023/09/26 23:52:54
Passenger center.
Passenger center.
0 2023/09/26 23:52:56
Passenger rear.
Passenger rear.
0 2023/09/26 23:52:57
Driver front, no more missing chunk here either. For never working with fiberglass before I'm happy with how it came out.
Driver front, no more missing chunk here either. For never working with fiberglass before I'm happy with how it came out.
0 2023/09/26 23:52:58
Driver center.
Driver center.
0 2023/09/26 23:53:00
Driver rear.
Driver rear.
0 2023/09/26 23:53:01
Center spoiler.
Center spoiler.
0 2023/09/26 23:53:03
Corner spoilers.
Corner spoilers.
0 2023/09/26 23:53:04
Door ground effects.
Door ground effects.
0 2023/09/26 23:53:05
Light coat of epoxy on the undersides of the rear spoiler pieces.
Light coat of epoxy on the undersides of the rear spoiler pieces.
0 2023/09/28 01:37:03
2 more coats on the hatch. I think after I sand them it wont need anymore.
2 more coats on the hatch. I think after I sand them it wont need anymore.
0 2023/09/28 01:37:05
Top is the one off the care, its split horizontally from the wreck that bent the quarter and damaged the bumper cover. Bottom one is off the parts car.
Top is the one off the care, its split horizontally from the wreck that bent the quarter and damaged the bumper cover. Bottom one is off the parts car.
0 2023/09/28 01:37:06
Passenger side ground effects just sitting back on the car.
Passenger side ground effects just sitting back on the car.
0 2023/09/28 01:37:08
Once I bolt them back up then the front gets 2 screws behind the emblem that pulls that part into place.
Once I bolt them back up then the front gets 2 screws behind the emblem that pulls that part into place.
0 2023/09/28 01:37:09
Driver side setting in place.
Driver side setting in place.
0 2023/09/28 01:37:11
Same here with the screws that go in the front.
Same here with the screws that go in the front.
0 2023/09/28 01:37:13
Hatch and spoiler hand blocked and ready for high build.
Hatch and spoiler hand blocked and ready for high build.
0 2023/09/29 00:18:42
Spoiler is just setting in place. I will probably raise it with washers when painting the car just to have clean lines.
Spoiler is just setting in place. I will probably raise it with washers when painting the car just to have clean lines.
0 2023/09/29 00:18:43
Starting to look more like a car again.
Starting to look more like a car again.
0 2023/09/29 00:18:45
Driver lower ground effect just sitting loose. I still have to strip and epoxy the rear bumper cover plus make repairs on the passenger side.
Driver lower ground effect just sitting loose. I still have to strip and epoxy the rear bumper cover plus make repairs on the passenger side.
0 2023/09/29 00:18:47
Passenger rear lower ground effect off the parts car sanded and ready for epoxy.
Passenger rear lower ground effect off the parts car sanded and ready for epoxy.
0 2023/09/29 00:18:48
Sanded the bondo spot on the front and then blocked door to fender.
Sanded the bondo spot on the front and then blocked door to fender.
0 2023/09/29 00:18:50
Blocked the door to get the center body line cleaner. You wont see it once the car is painted and decaled though as it gets a black vinyl divider strip down the center to break the paint colors.
Blocked the door to get the center body line cleaner. You wont see it once the car is painted and decaled though as it gets a black vinyl divider strip down the center to break the paint colors.
0 2023/09/29 00:18:51
Blocking the door to quarter and found a small high spot in my bondo work.
Blocking the door to quarter and found a small high spot in my bondo work.
0 2023/09/29 00:18:53
One more spray out of epoxy on the door and then its ready for high build.
One more spray out of epoxy on the door and then its ready for high build.
0 2023/09/29 00:18:55
Pretty sure this is the last coat of epoxy on it wheel well to wheel well before high build. Still have to do some bondo work on the front of the fender though.
Pretty sure this is the last coat of epoxy on it wheel well to wheel well before high build. Still have to do some bondo work on the front of the fender though.
0 2023/09/29 23:09:04
Door to fender sealed in.
Door to fender sealed in.
0 2023/09/29 23:09:07
Door to quarter sealed in.
Door to quarter sealed in.
0 2023/09/29 23:09:08
Keep in mind this is just the first stages of primer.
Keep in mind this is just the first stages of primer.
0 2023/09/29 23:09:09
Happy with how the door came out given all the damage.
Happy with how the door came out given all the damage.
0 2023/09/29 23:09:11
Sealed in the passenger rear lower ground effect.
Sealed in the passenger rear lower ground effect.
0 2023/09/29 23:09:13
The brand new short block that we are robbing the crank and rods from to build the 302 inch engine.
The brand new short block that we are robbing the crank and rods from to build the 302 inch engine.
0 2023/09/29 23:09:14
Lots of nooks and crannies to hand sand.
Lots of nooks and crannies to hand sand.
0 2023/10/01 20:03:56