Third Generation F-Body Message Boards
Moving the strut.
Moving the strut.
0 2023/07/13 00:55:09
Passenger strut mount loosely installed.
Passenger strut mount loosely installed.
0 2023/07/13 00:55:10
Driver side loosely in place.
Driver side loosely in place.
0 2023/07/13 00:55:12
Door handle, lock and mirror removed driver side.
Door handle, lock and mirror removed driver side.
0 2023/07/13 00:55:13
0 2023/07/13 00:55:15
0 2023/07/13 00:55:16
Driver side door handle, lock and mirror removed.
Driver side door handle, lock and mirror removed.
0 2023/07/13 01:04:24
0 2023/07/13 01:04:26
Passenger side door handle, lock and mirror removed.
Passenger side door handle, lock and mirror removed.
0 2023/07/13 01:04:27
0 2023/07/13 01:04:29
0 2023/07/13 01:04:30
0 2023/07/13 08:20:41
0 2023/07/13 23:59:49
0 2023/07/13 23:59:50
0 2023/07/13 23:59:53
0 2023/07/13 23:59:55
Electric angle grinder. The disc on it is a flap disc for grinding welds but the blue disc below it is for paint.
Electric angle grinder. The disc on it is a flap disc for grinding welds but the blue disc below it is for paint.
0 2023/07/14 00:00:35
Drivers window regulator riveted back in place.
Drivers window regulator riveted back in place.
0 2023/07/18 22:00:43
Tracks and all loosely back in.
Tracks and all loosely back in.
0 2023/07/18 22:00:46
More evidence of the blue stripes on the drivers door.
More evidence of the blue stripes on the drivers door.
0 2023/07/18 22:00:47
Passenger regulator riveted back in.
Passenger regulator riveted back in.
0 2023/07/18 22:00:50
Passenger tracks loosely installed.
Passenger tracks loosely installed.
0 2023/07/18 22:00:51
Passenger door, the door frame is original but it was reskinned in 88 or 89. They never bothered to repaint this area.
Passenger door, the door frame is original but it was reskinned in 88 or 89. They never bothered to repaint this area.
0 2023/07/18 22:00:52
Laying out the cross rods and radiator ducting.
Laying out the cross rods and radiator ducting.
0 2023/07/18 22:00:54
0 2023/07/18 22:00:56
Its dusty but I'll blow it off when I get my compressor fixed.
Its dusty but I'll blow it off when I get my compressor fixed.
0 2023/07/18 22:00:57
0 2023/07/18 22:00:58
0 2023/07/18 22:01:00
Stud gun for pulling panels.
Stud gun for pulling panels.
0 2023/07/18 22:11:22
Test studs to see if the panel will even move.
Test studs to see if the panel will even move.
0 2023/07/18 22:11:24
This whole area was up and in by a good bit plus no wheel opening body line.
This whole area was up and in by a good bit plus no wheel opening body line.
0 2023/07/18 22:11:25
This is how far the wheel flare body line had moved up from the damage. It should be about 3/4 inch from the bottom.
This is how far the wheel flare body line had moved up from the damage. It should be about 3/4 inch from the bottom.
0 2023/07/18 22:11:27
Starting to pull and hammer and move the line back down.
Starting to pull and hammer and move the line back down.
0 2023/07/18 22:11:28
Starting to get some definition.
Starting to get some definition.
0 2023/07/18 22:11:30
This area was real bad too.
This area was real bad too.
0 2023/07/18 22:11:32
0 2023/07/18 22:11:33
Some progress.
Some progress.
0 2023/07/18 22:11:34
Lower body line starting to take shape.
Lower body line starting to take shape.
0 2023/07/18 22:11:36
Looking down to check the flare.
Looking down to check the flare.
0 2023/07/18 22:11:37
Not finished but much better than it started as.
Not finished but much better than it started as.
0 2023/07/18 22:11:39