hydroboost

May 14, 2010

6

1

Description:
Installing a new hydroboost in the TA

Read more »

HYDROBOOST WITH ADJUSTABLE PUSHROD.
THIS PICTURE ALSO SHOWS THE MOUNTING PLATE FROM THE ORIGINAL BOOSTER. THE ONLY MOD YOU WILL HAVE TO DO IS CUT DOWN THE RUBBER BOOT BY 1/4" TO 1/2".

HYDROBOOST WITH ADJUSTABLE PUSHROD. THIS PICTURE ALSO SHOWS THE MOUNTING PLATE FROM THE ORIGINAL BOOSTER. THE ONLY MOD YOU WILL HAVE TO DO IS CUT DOWN THE RUBBER BOOT BY 1/4" TO 1/2".

0 2010/05/16 07:45:48 500+hpta

THIS IS THE TWO HALVES JOINED WITH A THREADED UION. THREAD SIZE I USED IS 3/8" X 16

THIS IS THE TWO HALVES JOINED WITH A THREADED UION. THREAD SIZE I USED IS 3/8" X 16

0 2010/05/16 07:48:39 500+hpta

THIS IS THE NEW PUSH BAR FROM THE OLD BRAKE BOOSTER CUT 3/4" LONGER THAN THE SECTION CUT OFF FROM THE ORIGINAL FROM THE HYDROBOOST.

THIS IS THE NEW PUSH BAR FROM THE OLD BRAKE BOOSTER CUT 3/4" LONGER THAN THE SECTION CUT OFF FROM THE ORIGINAL FROM THE HYDROBOOST.

0 2010/05/16 07:48:39 500+hpta

OLD PUSH BAR CUT OFF AND HYDROBOOST SIDE THREADED

OLD PUSH BAR CUT OFF AND HYDROBOOST SIDE THREADED

0 2010/05/16 07:48:39 500+hpta

THIS IS THE PUSH ROD FROM THE OLD BOOSTER CUT AND THREADED LAYING ON TOP OF THE PUSHROD FROM THE HYDROBOOST. THE POINT OF THE WOOD BIT SHOWS WHERE I CUT THE BAR AND THREADED IT AT THAT POINT. TO HELP WHERE YOU CAN CUT THE PUSH BAR ON THE HYDROBOOST PUSH THE PUSHROD ALL THE WAY IN AND MARK IT 1/2" LONGER SO YOU CAN FULLY PRESS YOUR BRAKE.

THIS IS THE PUSH ROD FROM THE OLD BOOSTER CUT AND THREADED LAYING ON TOP OF THE PUSHROD FROM THE HYDROBOOST. THE POINT OF THE WOOD BIT SHOWS WHERE I CUT THE BAR AND THREADED IT AT THAT POINT. TO HELP WHERE YOU CAN CUT THE PUSH BAR ON THE HYDROBOOST PUSH THE PUSHROD ALL THE WAY IN AND MARK IT 1/2" LONGER SO YOU CAN FULLY PRESS YOUR BRAKE.

0 2010/05/16 07:54:58 500+hpta

THE HYDROBOOST FROM 95 ASTRO VAN

THE HYDROBOOST FROM 95 ASTRO VAN

1 2010/05/16 08:04:08 500+hpta