Third Generation F-Body Message Boards
001 (38) Well, I don't like plastic bumpers either.... Then one modification led to another....and another.....ad infinitum!!!!
001 (38) Well, I don't like plastic bumpers either.... Then one modification led to another....and another.....ad infinitum!!!!
3 2009/09/26 16:54:01
002 (37) Getting started on the frame ties/
002 (37) Getting started on the frame ties/
0 2009/09/26 16:54:01
004 (20) Never did like hatchbacks, so I built a roof back half....
004 (20) Never did like hatchbacks, so I built a roof back half....
0 2009/09/26 16:54:01
002 (40) Getting started on the driver's footwell. It will be a bit crowded for a 3 pedal car, but will work just fine!!!! Won't be driving with work boots on though!!!!!
002 (40) Getting started on the driver's footwell. It will be a bit crowded for a 3 pedal car, but will work just fine!!!! Won't be driving with work boots on though!!!!!
0 2009/09/27 19:38:01
003 (43) Using the stock seat for mockup only.... The "real" seats will be Kirkey aluminum seats with a fabric cover---and the OEM seats will be sold and hopefully find a new home in someone else's 3rd Gen!!
003 (43) Using the stock seat for mockup only.... The "real" seats will be Kirkey aluminum seats with a fabric cover---and the OEM seats will be sold and hopefully find a new home in someone else's 3rd Gen!!
0 2009/09/27 19:38:01
007 (28)
007 (28)
0 2009/10/10 12:52:34
3rd gen with a deck lid!
3rd gen with a deck lid!
0 2009/10/20 18:09:17
crowded footwell, but I fit!!!!
crowded footwell, but I fit!!!!
0 2009/10/27 19:22:29
the new back window and deck lid
the new back window and deck lid
0 2009/10/27 19:22:29
Upper control arm, lots of adjustment!
Upper control arm, lots of adjustment!
0 2009/10/27 19:22:29
Added a couple of 11ga. plates to the strut tower.. The longer one is where the front engine plate will attach, the smaller one towards the rear of the strut tower is some reinforcement for the strut tower support bar that will have a tube welded to it with the other end of the tube welded to the support bar below the dash inside the car.
Added a couple of 11ga. plates to the strut tower.. The longer one is where the front engine plate will attach, the smaller one towards the rear of the strut tower is some reinforcement for the strut tower support bar that will have a tube welded to it with the other end of the tube welded to the support bar below the dash inside the car.
0 2009/11/14 17:17:45
Just a shot showing the dash in it's rough beginning..It will have a 5" tach and speedo along with 7 different 2 5/8" gauges.
Just a shot showing the dash in it's rough beginning..It will have a 5" tach and speedo along with 7 different 2 5/8" gauges.
0 2009/11/14 17:17:45
another shot of the dash,steering coulmn, and driver's footwell from the passenger side. A bit crowded, but it will work out just fine! The price you pay for all the engine setback.....
another shot of the dash,steering coulmn, and driver's footwell from the passenger side. A bit crowded, but it will work out just fine! The price you pay for all the engine setback.....
0 2009/11/14 17:17:45
left side headers tacked together
left side headers tacked together
0 2010/03/03 20:38:59
another angle of left side
another angle of left side
0 2010/03/03 20:38:59