Third Generation F-Body Message Boards
055 THE AUTOMATIC SHIFTER IS MADE TO LOOK LIKE A STICK,WITH THE LEATHER BOOT.THE WINDOW SWITCHES ARE MOUNTED IN FRONT OF IT NEXT TO THE POWER OUTLET. THE CONSOLE SITS UP HIGHER THAN STOCK.I HAD TO RAISE THE TUNNEL AND RE-WELD IT,TO CLEAR THE DRIVE SHAFT!!!!
055 THE AUTOMATIC SHIFTER IS MADE TO LOOK LIKE A STICK,WITH THE LEATHER BOOT.THE WINDOW SWITCHES ARE MOUNTED IN FRONT OF IT NEXT TO THE POWER OUTLET. THE CONSOLE SITS UP HIGHER THAN STOCK.I HAD TO RAISE THE TUNNEL AND RE-WELD IT,TO CLEAR THE DRIVE SHAFT!!!!
0 2010/01/12 18:44:38
Air Intake for sale . Air go in through the High Beam light !. MASS AIR FLOW ,Sensor not included. $350 plus shipping
Air Intake for sale . Air go in through the High Beam light !. MASS AIR FLOW ,Sensor not included. $350 plus shipping
0 2024/02/19 17:58:09
066 THIS PROJECT WAS MY FIRST,EVERYTHING I WANTED AT THE TIME AND MORE,EVERY PART BY ITS SELF AND TOGETHER WORK !!! (DO IT WELL DO IT CHEAP,WRECKING YARDS ARE YOUR BEST FRIEND)
066 THIS PROJECT WAS MY FIRST,EVERYTHING I WANTED AT THE TIME AND MORE,EVERY PART BY ITS SELF AND TOGETHER WORK !!! (DO IT WELL DO IT CHEAP,WRECKING YARDS ARE YOUR BEST FRIEND)
0 2010/01/12 18:46:24
069 THIS CAMARO BUMBER HAS A TRANS-AM LICENCE PLATE SURROUND MOULDED IN FOR THE EXHAUST EXIT.LOOKS FACTORY HUH !!!
069 THIS CAMARO BUMBER HAS A TRANS-AM LICENCE PLATE SURROUND MOULDED IN FOR THE EXHAUST EXIT.LOOKS FACTORY HUH !!!
0 2010/01/12 18:48:09
054 94 TRUCK HANDLES FINISH UP THE DOORS. ALL PARTS CAME FROM GM SPORTS, IN SAN JOSE,CALIFORNIA....
054 94 TRUCK HANDLES FINISH UP THE DOORS. ALL PARTS CAME FROM GM SPORTS, IN SAN JOSE,CALIFORNIA....
0 2010/01/12 18:53:54
RAPID RIDES 09 044 THESE WHEELS ARE CRAGAR SOFT 8 ,CHEAP 17X9 THE REAR WHEELS WERE STRETCHED TO 12'' TO ACCOMMODATE THE 335 TIRES. NOW IT NEEDS SOME BIG GRAPHICS..IRON CROSS MAYBE!!!!!
RAPID RIDES 09 044 THESE WHEELS ARE CRAGAR SOFT 8 ,CHEAP 17X9 THE REAR WHEELS WERE STRETCHED TO 12'' TO ACCOMMODATE THE 335 TIRES. NOW IT NEEDS SOME BIG GRAPHICS..IRON CROSS MAYBE!!!!!
0 2010/01/15 21:57:44
0 2024/02/19 17:58:20
0 2024/02/19 17:58:12
A 5'' EXIT RACE MUFFLER, BANG!!!!!! THE PANEL UNDER REAR IS POWDER COATED TO KEEP THE HEAT DOWN THE PANEL ALSO HAS FRONT COVERS TO SEAL IT OFF FROM WIND AND GARBAGE , IT ALSO COVERS UP THE 89 CORVETTE REAR END
A 5'' EXIT RACE MUFFLER, BANG!!!!!! THE PANEL UNDER REAR IS POWDER COATED TO KEEP THE HEAT DOWN THE PANEL ALSO HAS FRONT COVERS TO SEAL IT OFF FROM WIND AND GARBAGE , IT ALSO COVERS UP THE 89 CORVETTE REAR END
0 2010/01/18 22:09:22
0 2024/02/19 17:58:22
0 2024/02/19 17:58:14
0 2024/02/19 17:58:24
067 CLEARLY THE CAMARO IS BEATING THE CROSSFIRE SRT6
067 CLEARLY THE CAMARO IS BEATING THE CROSSFIRE SRT6
0 2010/04/10 14:12:43
0 2024/02/19 17:58:17
BEHIND THE RIGHT HEADLIGHT YOU CAN SEE THE MODIFIED MOROSO CATCH CAN. THE AIR INTAKE IS CUSTOM MADE, WITH MUSTANG ELBOWS AND TRANS-AM FILTER CANS.THE RAM AIR COMES THROUGH THE HEAD LIGHTS....
BEHIND THE RIGHT HEADLIGHT YOU CAN SEE THE MODIFIED MOROSO CATCH CAN. THE AIR INTAKE IS CUSTOM MADE, WITH MUSTANG ELBOWS AND TRANS-AM FILTER CANS.THE RAM AIR COMES THROUGH THE HEAD LIGHTS....
0 2010/01/15 21:49:45
077 MODIFIED 4TH GEN DOOR PANELS FIT GOOD FIRST TIME (A LOT OF WORK) !!!
077 MODIFIED 4TH GEN DOOR PANELS FIT GOOD FIRST TIME (A LOT OF WORK) !!!
0 2010/01/12 18:53:54
115 NO FUMES IN CAR !!!!
115 NO FUMES IN CAR !!!!
0 2010/04/10 14:12:43
0 2024/02/19 17:58:27
0 2024/02/19 17:58:15
TRUCK FUEL TANK INSIDE. MADE A SUB FLOOR OUT OF WOOD AND METAL.I NOW FILL TANK TROUGH THE CORVETTE FILLER DOOR,TRICK !!! P.S NO FUMES INSIDE.
TRUCK FUEL TANK INSIDE. MADE A SUB FLOOR OUT OF WOOD AND METAL.I NOW FILL TANK TROUGH THE CORVETTE FILLER DOOR,TRICK !!! P.S NO FUMES INSIDE.
0 2010/04/10 14:15:54
068 Custom White 87 Camaro. THE 335'S JUST TUCK IN, I HAD TO ROLE UP THE FENDERS , VERY CLOSE !!!!!
068 Custom White 87 Camaro. THE 335'S JUST TUCK IN, I HAD TO ROLE UP THE FENDERS , VERY CLOSE !!!!!
0 2010/01/15 22:06:31
USED HIGH BEAMS AS AIR INTAKE. RAM-AIR NO LESS !!!
USED HIGH BEAMS AS AIR INTAKE. RAM-AIR NO LESS !!!
0 2010/04/20 19:13:00
FRONT BRAKES FROM A CORVETTE GRAN-SPORT.I MILLED DOWN MY OLD ROTORS,TO THE HUB,THEN TOOK THE SURFACE DOWN THE THICKNESS OF THE VETTE HAT,SO THAT THE WHEELS WOULD NOT STICK OUT.I MADE MY OWN BRACKETS TO MOUNT EVERYTHING!!! NOTICE THE TINT ON THE OUTER EDGE OF THE WINDSHIELD,THAT COVERS THE INNER (A) PANEL FROM VIEW. 4TH GEN DASH IS NARROWER.......
FRONT BRAKES FROM A CORVETTE GRAN-SPORT.I MILLED DOWN MY OLD ROTORS,TO THE HUB,THEN TOOK THE SURFACE DOWN THE THICKNESS OF THE VETTE HAT,SO THAT THE WHEELS WOULD NOT STICK OUT.I MADE MY OWN BRACKETS TO MOUNT EVERYTHING!!! NOTICE THE TINT ON THE OUTER EDGE OF THE WINDSHIELD,THAT COVERS THE INNER (A) PANEL FROM VIEW. 4TH GEN DASH IS NARROWER.......
0 2010/04/20 19:13:00
HERE IS THE NEW NOSE OPENING !!
HERE IS THE NEW NOSE OPENING !!
0 2010/04/20 19:13:00
killian 023 I NEED LESS CHROME AND MORE BLACK STUFF!!!
killian 023 I NEED LESS CHROME AND MORE BLACK STUFF!!!
0 2010/07/20 18:17:09
killian 020 I THINK ITS TIME FOR A WING.....
killian 020 I THINK ITS TIME FOR A WING.....
0 2010/07/20 18:17:09
RAPID RIDES 09 052.TIME TO TEAR DOWN THE ENGINE AGAIN ,NEW LOOK COMING SOON .....12 NEW MODIFICATIONS..... BY 6/2011
RAPID RIDES 09 052.TIME TO TEAR DOWN THE ENGINE AGAIN ,NEW LOOK COMING SOON .....12 NEW MODIFICATIONS..... BY 6/2011
0 2010/08/17 19:41:06
Picture 1 This is where we are going with the next project in a 3rd Gen,hardvert !!!
Picture 1 This is where we are going with the next project in a 3rd Gen,hardvert !!!
0 2010/08/23 00:04:01
080 This is my 2002 4th gen Camaro stuffed into a 59 Morris Minor. The front clip is from an 86 corvette (smaller Disc breaks for the 15'' wheels )
080 This is my 2002 4th gen Camaro stuffed into a 59 Morris Minor. The front clip is from an 86 corvette (smaller Disc breaks for the 15'' wheels )
0 2010/08/23 23:31:01
090 Camaro rear end cut way down,all parts in mock up! Notice the Corvette front clip ,I narrowed it by 11 inches to keep the A arm ,length... this is a 59 Morris Minor
090 Camaro rear end cut way down,all parts in mock up! Notice the Corvette front clip ,I narrowed it by 11 inches to keep the A arm ,length... this is a 59 Morris Minor
0 2010/08/26 23:34:06
094 HIGH FLOOR GAVE SPACE FOR THE EXHAUST AND A BELLY PAN (POWDER COATED) TO REDUCE THE HEAT....
094 HIGH FLOOR GAVE SPACE FOR THE EXHAUST AND A BELLY PAN (POWDER COATED) TO REDUCE THE HEAT....
0 2010/08/26 23:36:31
052
052
0 2010/08/31 23:43:34
106
106
0 2010/09/23 20:29:40
0 2010/09/23 21:55:19
0 2010/09/23 21:55:19
wheels and stance
wheels and stance
0 2010/10/30 16:04:30
black wheel
black wheel
0 2010/10/31 23:07:44
0 2024/02/19 17:57:48
0 2024/02/19 17:57:51
0 2024/02/19 17:57:53