Third Generation F-Body Message Boards
fed with an LS2 intake
fed with an LS2 intake
0 2013/02/12 07:20:46
0 2015/10/05 03:49:12
Marla's shell, some work is needed but mostly ready to start building
Marla's shell, some work is needed but mostly ready to start building
0 2012/11/29 11:31:47
Custom narrowed 2x3 frame rails, custom triangulated 4 link, coil overs
Custom narrowed 2x3 frame rails, custom triangulated 4 link, coil overs
0 2013/06/05 05:39:46
Shell, rockers, floors and quarters replaced. Only the body parts will be "original". Wheels/interior/drivetrain to be updated.
Shell, rockers, floors and quarters replaced. Only the body parts will be "original". Wheels/interior/drivetrain to be updated.
0 2012/11/29 11:31:47
Custom narrowed 2x3 frame rails, custom triangulated 4 link, coil overs
Custom narrowed 2x3 frame rails, custom triangulated 4 link, coil overs
0 2013/06/05 05:39:46
0 2015/10/05 03:49:14
Ass-end of the new suspension, cars very very low
Ass-end of the new suspension, cars very very low
0 2013/06/05 05:39:46
The shell finally rolling again after who knows how many years, the repaired/restored front subframe will be installed soon with new coil overs. Car will have 18-19" wheels
The shell finally rolling again after who knows how many years, the repaired/restored front subframe will be installed soon with new coil overs. Car will have 18-19" wheels
0 2013/06/05 05:46:47
Rolling shell i picked up for a solid frame, misc body parts/glass etc
Rolling shell i picked up for a solid frame, misc body parts/glass etc
0 2012/11/29 11:31:47
Shifter and ebrake holes done
Shifter and ebrake holes done
0 2015/10/05 03:49:16
0 2015/10/05 03:48:53
Seat mock up, now have corbeau seats for it w/harnesses
Seat mock up, now have corbeau seats for it w/harnesses
0 2015/10/05 03:48:55
Roller shot, had good fenders, hood, one good door, some glass, suspension, misc brackets, frame etc etc. in new england its hard to find these with usable parts and when you do, they are expensive, i got the roller for $400, not too shabby.
Roller shot, had good fenders, hood, one good door, some glass, suspension, misc brackets, frame etc etc. in new england its hard to find these with usable parts and when you do, they are expensive, i got the roller for $400, not too shabby.
0 2012/11/29 11:35:33
Rear roller shot, it was nice to have a semi-complete car to at least do some envisioning on, the shell just wasnt the same to use for mocking purposes...eventually, all the good body pieces i dont use will be plasma cut out and the rest scrapped...One cars sacrifice to save another!!
Rear roller shot, it was nice to have a semi-complete car to at least do some envisioning on, the shell just wasnt the same to use for mocking purposes...eventually, all the good body pieces i dont use will be plasma cut out and the rest scrapped...One cars sacrifice to save another!!
0 2012/11/29 11:35:33
Pro tour bars, 8 point cage
Pro tour bars, 8 point cage
0 2015/10/05 03:48:57
Frame to body mount holes were oblonged as alot of these older cars have issues with, i made templates and repaired them.
Frame to body mount holes were oblonged as alot of these older cars have issues with, i made templates and repaired them.
0 2013/02/12 07:24:11
originally was using C5 brakes, now its getting SS brembos, coil over susp.
originally was using C5 brakes, now its getting SS brembos, coil over susp.
0 2015/10/05 03:48:59
LS9 head gaskets and Head studs installed on 5.3
LS9 head gaskets and Head studs installed on 5.3
0 2013/02/12 07:19:38
royal treatment
royal treatment
0 2015/10/05 03:49:01
Alittle touch of color
Alittle touch of color
0 2013/02/12 07:19:38
all 4 mount holes repaired, all measurements are square and within 1/8" of factory specs
all 4 mount holes repaired, all measurements are square and within 1/8" of factory specs
0 2013/02/12 07:24:11
good ol grant
good ol grant
0 2015/10/05 03:49:04
MN12 mock up w/ hooker x member
MN12 mock up w/ hooker x member
0 2015/10/05 03:49:06
0 2015/10/05 03:49:07
Finally some primer
Finally some primer
0 2015/10/05 03:49:09
0 2015/10/05 03:49:11