Third Generation F-Body Message Boards
0 2016/04/01 21:50:17
Drivers pipe to pass pipe.
Drivers pipe to pass pipe.
0 2016/04/01 21:55:26
drivers to pass pipe
drivers to pass pipe
0 2016/04/01 21:55:32
After cutting 6" out of the two sections of pipe.
After cutting 6" out of the two sections of pipe.
0 2016/04/01 21:55:39
third splice to get it all to line up right.
third splice to get it all to line up right.
0 2016/04/01 21:55:49
All pretty and ready to go back on.
All pretty and ready to go back on.
0 2016/04/03 16:45:05
Orange silicone is for exhaust not diffs lol! This stuff just peeled right off!
Orange silicone is for exhaust not diffs lol! This stuff just peeled right off!
0 2016/04/03 16:45:12
Most of the sealant stuck to the cover.
Most of the sealant stuck to the cover.
0 2016/04/03 16:45:19
Before it's simple green bath and scrub with the Scotchbrite.
Before it's simple green bath and scrub with the Scotchbrite.
0 2016/04/03 16:45:25
sanded, prepped, and ready for paint
sanded, prepped, and ready for paint
0 2016/04/03 16:45:32
This is the old setup that was on the motor.
This is the old setup that was on the motor.
0 2016/04/10 17:55:40
After having the piece turned on a lathe and new threads added.
After having the piece turned on a lathe and new threads added.
0 2016/04/10 17:55:46
It just fits under there now.
It just fits under there now.
0 2016/04/10 18:16:48
Tpi setup is all buttoned up...
Tpi setup is all buttoned up...
0 2016/04/10 18:17:43
After...
After...
0 2016/05/10 20:28:31
Before...
Before...
0 2016/05/10 20:28:38
0 2016/06/07 18:26:35
0 2016/06/07 18:59:59
0 2016/06/07 19:00:21
0 2017/01/24 20:34:49
0 2017/01/24 20:34:50
Main wiring 80% done, accessories and radiator all installed.
Main wiring 80% done, accessories and radiator all installed.
0 2017/04/09 18:54:08
Feed and return lines plumbed in with -6 AN Summit fittings and hose to accommodate the FAST fuel pressure sensor.
Feed and return lines plumbed in with -6 AN Summit fittings and hose to accommodate the FAST fuel pressure sensor.
0 2017/04/09 18:54:23
0 2017/05/14 14:27:13
0 2017/05/14 14:27:16
0 2017/05/14 14:27:19
0 2017/05/14 14:27:21
0 2017/05/21 14:14:39
0 2017/06/01 19:43:27
0 2017/06/02 22:01:36
0 2017/06/04 12:40:33
0 2017/06/04 12:40:45
FAST ecu tucked nicely up behind the headlight.
FAST ecu tucked nicely up behind the headlight.
0 2017/06/04 13:48:48
bundled wires running up the driver's side towards the C100 block.
bundled wires running up the driver's side towards the C100 block.
0 2017/06/04 13:48:59
FAST ignition box mounted right above the C100 block.
FAST ignition box mounted right above the C100 block.
0 2017/06/04 13:49:09
Harness for the handheld running through a factory plug location just to the right of the C100 block.
Harness for the handheld running through a factory plug location just to the right of the C100 block.
0 2017/06/04 13:49:20
Cut off a tab on the right side of the bracket and then drilled a couple new holes.
Cut off a tab on the right side of the bracket and then drilled a couple new holes.
0 2017/06/04 14:13:50
The bracket will mount onto the two rear intake bolts and be right next to the distributor.
The bracket will mount onto the two rear intake bolts and be right next to the distributor.
0 2017/06/04 14:13:59
0 2017/06/22 16:38:40
0 2017/06/22 16:40:48