Third Generation F-Body Message Boards
0 2015/07/20 09:48:36
0 2015/07/20 09:48:38
Don't mind the neon. My brother put it on a joke when I was out of town so when I found it I did to his car. It's no longer there.
Don't mind the neon. My brother put it on a joke when I was out of town so when I found it I did to his car. It's no longer there.
0 2015/07/20 10:13:36
0 2015/07/20 10:14:08
0 2015/07/20 10:15:42
0 2015/07/20 10:16:28
0 2015/07/20 10:17:48
0 2015/07/20 10:17:51
0 2015/07/20 10:17:53
0 2015/07/20 10:17:55
0 2015/07/26 06:42:11
0 2015/07/26 06:42:14
0 2015/07/26 06:42:28
Brembos all done just waiting on the seals to show up then the high temp stickers. Ill be getting the kit from Scott at the big brake upgrade for the rear to retain the parking brake and build my fronts with 1LE hubs and 3/8in steel plate.
Brembos all done just waiting on the seals to show up then the high temp stickers. Ill be getting the kit from Scott at the big brake upgrade for the rear to retain the parking brake and build my fronts with 1LE hubs and 3/8in steel plate.
0 2015/07/26 09:44:31
0 2015/07/26 20:14:31
0 2015/07/26 20:14:34
0 2015/07/26 20:14:38
0 2015/07/26 20:14:40
0 2015/07/30 19:12:11
0 2015/07/30 19:12:25
0 2015/07/30 19:12:38
0 2015/08/06 09:45:41
0 2015/09/21 09:58:40
0 2015/09/21 09:58:43
0 2015/09/21 09:58:45
0 2015/09/21 09:58:47
0 2015/10/01 18:03:23
0 2015/10/01 18:03:38
0 2015/10/01 18:03:56
0 2015/10/01 18:04:13
0 2015/10/01 18:04:29
0 2015/11/02 09:51:14
0 2015/11/02 09:51:28
0 2015/11/02 09:51:31
0 2015/11/02 09:51:35
0 2019/01/26 16:58:54
0 2019/01/27 17:42:56
0 2019/01/27 17:43:04
0 2019/01/27 17:43:05
Made some brackets for the front set up for the Brembos. Still need to open the spindle holes to their final size and then Powdercoat them. I’m about to order 1LE rotors to turn down to hubs and then I’ll start on the rear set up when I get my hands on a 4th gen rear end. I used the brackets from Luke Skaffs website and burned them out on a plasma table out of 3/8” plate.
Made some brackets for the front set up for the Brembos. Still need to open the spindle holes to their final size and then Powdercoat them. I’m about to order 1LE rotors to turn down to hubs and then I’ll start on the rear set up when I get my hands on a 4th gen rear end. I used the brackets from Luke Skaffs website and burned them out on a plasma table out of 3/8” plate.
0 2019/02/02 08:52:39