Third Generation F-Body Message Boards
My first try 89 RS “Nina”
My first try 89 RS “Nina”
0 2026/06/18 19:14:04
0 2026/06/18 19:14:09
0 2026/06/18 19:14:11
0 2026/06/18 19:14:15
0 2026/06/18 19:14:13
0 2026/06/18 19:14:07
0 2026/06/18 19:14:06
0 2026/06/18 19:17:28
0 2026/06/18 19:17:19
Marketplace add definitely avoided taking pictures of the passenger door which was royally fxxxxd but I had drove 2.5 hr and wasn’t coming back empty handed
Marketplace add definitely avoided taking pictures of the passenger door which was royally fxxxxd but I had drove 2.5 hr and wasn’t coming back empty handed
0 2026/06/18 19:17:16
0 2026/06/18 19:17:18
0 2026/06/18 19:17:26
When I picked her up sept 2025 in Maryland
When I picked her up sept 2025 in Maryland
0 2026/06/18 19:17:12
0 2026/06/18 19:17:15
0 2026/06/18 19:17:34
0 2026/06/18 19:17:13
First day back at my shop in VA
First day back at my shop in VA
0 2026/06/18 19:17:32
0 2026/06/18 19:17:29
0 2026/06/18 19:25:24
Thank god my uncle was home to help me load it
Thank god my uncle was home to help me load it
0 2026/06/18 19:32:30
Had to make sure nothing was seized but surprisingly everything still looked brand new
Had to make sure nothing was seized but surprisingly everything still looked brand new
0 2026/06/18 19:32:33
Even though I ordered this pan for the stroke that I was running, the crank was still catching the roof of the windage tray so I had to notch it out on the inside😬 didn’t like cuttin on a $350 oil pan
Even though I ordered this pan for the stroke that I was running, the crank was still catching the roof of the windage tray so I had to notch it out on the inside😬 didn’t like cuttin on a $350 oil pan
0 2026/06/18 19:32:50
0 2026/06/18 19:33:00
I had to recheck all my valve lash before tightening the stud girdles down
I had to recheck all my valve lash before tightening the stud girdles down
0 2026/06/18 19:32:56
0 2026/06/18 19:32:53
And oil filter housing
And oil filter housing
0 2026/06/18 19:32:46
Building a motor from scratch you run into hang ups like finding an oil pump bolt
Building a motor from scratch you run into hang ups like finding an oil pump bolt
0 2026/06/18 19:32:37
0 2026/06/18 19:43:27
0 2026/06/18 19:43:25
0 2026/06/18 19:46:34
0 2026/06/18 19:46:36
0 2026/06/18 19:49:44
0 2026/06/18 19:49:38
Fuckin tire balancer has a nice haze of aluminum on it now Lls
Fuckin tire balancer has a nice haze of aluminum on it now Lls
0 2026/06/18 19:49:35
0 2026/06/18 19:49:33
0 2026/06/18 19:49:30
0 2026/06/18 19:49:27
0 2026/06/18 19:49:40
0 2026/06/18 19:49:24
0 2026/06/18 19:49:20