Third Generation F-Body Message Boards
Hooker Blackheart Dual Exhaust system
Hooker Blackheart Dual Exhaust system
0 2016/04/02 19:15:49
Hooker Blackheart Dual Exhaust system
Hooker Blackheart Dual Exhaust system
0 2016/04/02 19:15:47
Hooker Blackheart Dual Exhaust system
Hooker Blackheart Dual Exhaust system
0 2016/04/02 19:15:46
Hooker Blackheart Dual Exhaust system
Hooker Blackheart Dual Exhaust system
0 2016/04/02 19:15:45
Hooker Blackheart Dual Exhaust system
Hooker Blackheart Dual Exhaust system
0 2016/04/02 19:15:34
Tremec installed
Tremec installed
0 2016/04/02 19:15:26
Don't use the Hooker relocation brackets if your running the spohn K member. #4 will not clear the back control arm mount
Don't use the Hooker relocation brackets if your running the spohn K member. #4 will not clear the back control arm mount
0 2016/04/02 19:15:18
Trans Dapt SBC brackets with Spohn Chrome Moly K member for SBC
Trans Dapt SBC brackets with Spohn Chrome Moly K member for SBC
0 2016/04/02 19:15:12
Trans Dapt SBC brackets with Spohn Chrome Moly K member for SBC
Trans Dapt SBC brackets with Spohn Chrome Moly K member for SBC
0 2016/04/02 19:15:06
Holley Accessory Drive
Holley Accessory Drive
0 2016/04/02 19:14:56
Holley Accessory Drive
Holley Accessory Drive
0 2016/04/02 19:14:52
Tremec issues...
Tremec issues...
0 2016/04/02 19:14:38
0 2016/04/02 19:14:30
0 2016/04/02 19:14:15
0 2016/04/02 19:14:08
0 2015/11/14 17:39:09
Sizing up the Drivers battery tray/Evap canister area for the relay set and ecu. A friend is going to use the template to build a polished stainless steel box and I'm using Aircraft bulkhead connectors and cable cannon plugs to terminate the wiring for the relay bank and ecu
Sizing up the Drivers battery tray/Evap canister area for the relay set and ecu. A friend is going to use the template to build a polished stainless steel box and I'm using Aircraft bulkhead connectors and cable cannon plugs to terminate the wiring for the relay bank and ecu
0 2015/10/09 19:29:49
0 2016/04/03 05:01:37
0 2016/04/03 05:01:49
0 2015/11/14 17:38:57
Yes, it fits. With just some minor machining to the TB for the lower bolts to go into the pre-existing Intake holes
Yes, it fits. With just some minor machining to the TB for the lower bolts to go into the pre-existing Intake holes
0 2015/09/23 15:21:51
Spohn K-member clearance with the stock LS3 GMPP pan
Spohn K-member clearance with the stock LS3 GMPP pan
0 2016/05/15 06:47:16
0 2016/04/03 05:01:40
Sizing up the Drivers battery tray/Evap canister area for the relay set and ecu. A friend is going to use the template to build a polished stainless steel box and I'm using Aircraft bulkhead connectors and cable cannon plugs to terminate the wiring for the relay bank and ecu
Sizing up the Drivers battery tray/Evap canister area for the relay set and ecu. A friend is going to use the template to build a polished stainless steel box and I'm using Aircraft bulkhead connectors and cable cannon plugs to terminate the wiring for the relay bank and ecu
0 2015/10/09 19:30:07
0 2015/11/14 17:38:36
The front of the GM F-Body pan drops down an half inch more than the stock pan GM sends on the LS3 Crate motor. This caused the steering centerlink to hit the pan and could not be bolted in place.
The front of the GM F-Body pan drops down an half inch more than the stock pan GM sends on the LS3 Crate motor. This caused the steering centerlink to hit the pan and could not be bolted in place.
0 2016/05/15 06:45:02
Easy in and out and no I'm not using the solid motor mounts...
Easy in and out and no I'm not using the solid motor mounts...
0 2015/10/31 05:23:04
Baer racing bump steer kit
Baer racing bump steer kit
0 2016/05/15 06:43:06
0 2015/11/14 17:38:21
I got the doors set 3 nights ago to put the front fenders back on
I got the doors set 3 nights ago to put the front fenders back on
0 2015/10/09 19:29:33
0 2015/10/25 07:57:41
Centerlink clearance w/ Stock LS3 pan
Centerlink clearance w/ Stock LS3 pan
0 2016/05/15 06:44:48
0 2015/11/14 17:38:02
0 2015/10/25 07:56:52
Clearance
Clearance
0 2016/05/14 20:19:50
Centerlink clearance w/ Stock LS3 pan
Centerlink clearance w/ Stock LS3 pan
0 2016/05/15 06:44:29
2002 F-Body fuel tank
2002 F-Body fuel tank
0 2015/09/23 15:24:55
0 2015/10/31 05:22:44
Pulled for a rebuild
Pulled for a rebuild
0 2015/10/31 05:21:47
Baer racing bump steer kit
Baer racing bump steer kit
0 2016/05/15 06:43:32