Third Generation F-Body Message Boards
0 2016/08/12 21:43:48
0 2016/08/12 21:46:09
0 2016/08/12 21:50:42
0 2016/08/12 22:30:38
0 2016/08/12 22:30:51
0 2016/08/12 22:30:58
0 2016/08/12 22:31:11
0 2016/08/12 22:31:18
0 2016/08/12 22:32:41
0 2016/08/12 22:40:53
0 2016/08/18 22:44:31
0 2016/08/21 20:12:27
0 2016/08/21 20:34:01
0 2016/08/22 22:42:55
0 2016/08/23 22:01:29
0 2016/08/23 22:06:13
0 2016/08/23 22:06:54
0 2016/08/23 22:11:32
0 2016/08/23 22:12:45
0 2016/08/23 22:17:57
0 2017/03/02 08:15:51
0 2017/03/02 08:16:07
0 2017/03/15 08:00:59
0 2017/03/15 19:50:29
0 2017/04/05 23:41:38
Lower firewall spreader bar to support rearward a-arm ears. transverses between oil pan and bell housing. Also note carbon fiber driveshaft.
Lower firewall spreader bar to support rearward a-arm ears. transverses between oil pan and bell housing. Also note carbon fiber driveshaft.
0 2017/04/06 20:20:36
Older pic of exhaust prior to that being lightened. Lightweight Wilwood rear disc. Not the clocking on the sway bar axle mounts. The wheel base is shortened 1 1/2"
Older pic of exhaust prior to that being lightened. Lightweight Wilwood rear disc. Not the clocking on the sway bar axle mounts. The wheel base is shortened 1 1/2"
0 2017/04/06 20:31:21
Lightweight drilled flange axles. Lightweight 3.42 roadrace gears. Auburn autox posi. Alum diff support
Lightweight drilled flange axles. Lightweight 3.42 roadrace gears. Auburn autox posi. Alum diff support
0 2017/04/06 20:34:07
Stainless works 34.5" bullet muffler in I-pipe position. Low and center in wheelbase. Small cherrybomb 12" resonator muffler in rear dump.
Stainless works 34.5" bullet muffler in I-pipe position. Low and center in wheelbase. Small cherrybomb 12" resonator muffler in rear dump.
0 2017/04/06 20:49:58
Dynamat lining floor and rear firewall for better chassis weight distrubution
Dynamat lining floor and rear firewall for better chassis weight distrubution
0 2017/04/06 20:51:49
0 2017/04/06 20:52:52
34.5" long Stainless Works custom I-pipe bullet muffler to center most of muffler weight between wheelbase.
34.5" long Stainless Works custom I-pipe bullet muffler to center most of muffler weight between wheelbase.
0 2017/04/06 20:53:53
Dynamat lining floor board and rear firewall for better chassis weight distribution
Dynamat lining floor board and rear firewall for better chassis weight distribution
0 2017/04/06 20:55:02
0 2017/04/06 20:55:56
Momo race recliners mounted extremely low to the floor board with custom welded brackets
Momo race recliners mounted extremely low to the floor board with custom welded brackets
0 2017/04/06 20:56:28
0 2017/04/06 20:58:57
0 2017/04/06 20:59:46
0 2017/04/06 21:00:21
Custom made front brake brackets
Custom made front brake brackets
0 2017/04/06 21:03:46
The massive and extremely light weight 6piston 13" front brakes
The massive and extremely light weight 6piston 13" front brakes
0 2017/04/06 21:05:26