Third Generation F-Body Message Boards
0 2018/07/16 12:49:26
She fits!
She fits!
0 2018/07/16 12:49:24
I opted for fittings from AeroFlow. They make these fittings with a constant outer diameter without that pencil necking like most fittings have. These are really nice fittings.
I opted for fittings from AeroFlow. They make these fittings with a constant outer diameter without that pencil necking like most fittings have. These are really nice fittings.
0 2018/07/16 12:42:30
I pulled the stock pressed in tubes out and tig welded some Earls -10 AN fittings in place of them. Likewise, I tig welded a stainless -20AN on the top side after cutting the stock tube in half. I was going to go with an aluminum extender but I couldn't find one that maintained the inner diameter of the pump casting.
I pulled the stock pressed in tubes out and tig welded some Earls -10 AN fittings in place of them. Likewise, I tig welded a stainless -20AN on the top side after cutting the stock tube in half. I was going to go with an aluminum extender but I couldn't find one that maintained the inner diameter of the pump casting.
0 2018/07/16 12:42:28
I installed the bulkhead fittings for the Vintage Air unit along with the mighty mouse catch can.
I installed the bulkhead fittings for the Vintage Air unit along with the mighty mouse catch can.
0 2018/07/16 12:42:25
Had to use two floor jacks to get me that extra couple of inches. Jack stands on the ready should the lift fail.
Had to use two floor jacks to get me that extra couple of inches. Jack stands on the ready should the lift fail.
0 2018/07/16 12:29:34
I did this myself and I am shocked how easy it was. These cars are incredibly light when the whole front clip end is disassembled.
I did this myself and I am shocked how easy it was. These cars are incredibly light when the whole front clip end is disassembled.
0 2018/07/16 12:29:32
These China Freight dollies worked really well despite how sketchy it looks.
These China Freight dollies worked really well despite how sketchy it looks.
0 2018/07/16 12:29:29
Getting her all centered and ready for the body lift install method.
Getting her all centered and ready for the body lift install method.
0 2018/07/16 12:29:27
No interference anywhere.
No interference anywhere.
0 2018/07/16 12:27:07
Coated blackheart headers fit really nice.
Coated blackheart headers fit really nice.
0 2018/07/16 12:27:04
The engine sat too far rearward with the poly bushing allinged this way. I took it out and flipped it 180.
The engine sat too far rearward with the poly bushing allinged this way. I took it out and flipped it 180.
0 2018/07/16 11:31:37
Correct mounts loosely bolted in
Correct mounts loosely bolted in
0 2018/07/16 11:31:35
The correct UMI 2409 mounts
The correct UMI 2409 mounts
0 2018/07/16 11:31:33
Getting the K-member aligned.
Getting the K-member aligned.
0 2018/07/16 11:31:30
0 2018/07/16 11:27:23
0 2018/05/14 17:35:57
0 2018/05/14 17:35:44
0 2018/04/25 18:26:06
0 2018/04/25 18:25:58
0 2018/04/25 18:25:50
0 2018/04/25 18:25:41
0 2018/04/25 18:25:33
0 2018/04/25 18:25:24
0 2018/04/25 18:25:16
0 2018/04/25 18:25:02
0 2018/04/25 18:24:47
0 2018/04/25 18:24:36
0 2018/04/25 13:07:05
0 2018/04/25 13:07:03
0 2018/04/25 13:07:01
0 2018/04/25 12:57:51
0 2018/04/25 12:57:48
0 2018/04/25 12:57:46
0 2018/04/25 12:57:43
0 2018/04/25 12:57:41
0 2018/04/25 12:57:33
0 2018/04/25 12:54:17
0 2018/04/25 12:54:15
0 2018/04/25 12:54:12