Third Generation F-Body Message Boards
Car hit something pretty hard back when i was 5. Im 26 now, hence the low miles and cheap price
Car hit something pretty hard back when i was 5. Im 26 now, hence the low miles and cheap price
0 2016/02/15 03:35:53
This seam but now that im looking at it again ive answered my own question
This seam but now that im looking at it again ive answered my own question
0 2016/02/16 12:44:15
0 2016/02/16 12:45:59
Probobally clamp these together and weld them when i have the quarter off
Probobally clamp these together and weld them when i have the quarter off
0 2016/02/16 12:46:44
It was in another 6in or so but i beat it out to see what was bent inbetween the quarter and the inner structure. After a couple hours still had no idea so ill see when i cut the sheetmetal off
It was in another 6in or so but i beat it out to see what was bent inbetween the quarter and the inner structure. After a couple hours still had no idea so ill see when i cut the sheetmetal off
0 2016/02/16 12:48:17
0 2016/02/23 09:12:29
Its an 83 se 305 5spd that someone took care of until this happened in 95. She sat until i bought it last spring for next to nothing. Actually never touched the carb other than replacing every inch of vacuem line. Alot of brake work was done and fuel was a bit of a problem but it never left me stranded. Im in the process now of trying to get this fixed. Anyone have a firebird within 150 miles of charlotte i could cut a "little" metal off of?
Its an 83 se 305 5spd that someone took care of until this happened in 95. She sat until i bought it last spring for next to nothing. Actually never touched the carb other than replacing every inch of vacuem line. Alot of brake work was done and fuel was a bit of a problem but it never left me stranded. Im in the process now of trying to get this fixed. Anyone have a firebird within 150 miles of charlotte i could cut a "little" metal off of?
0 2016/02/24 12:36:36
0 2016/02/24 12:46:14
Finally got around to getting to the junkyard and found what i was looking for
Finally got around to getting to the junkyard and found what i was looking for
0 2016/03/03 17:32:32
0 2016/03/03 17:33:45
Someones been here before me
Someones been here before me
0 2016/03/03 17:34:21
Someone ruined this hood being a d*** im sure
Someone ruined this hood being a d*** im sure
0 2016/03/03 17:36:19
0 2016/03/03 17:38:13
0 2016/07/03 06:38:18
0 2016/07/03 06:39:09
0 2016/07/03 06:39:39
She was ready for the road again until this happened. I bought the camaro for less than i could get a hood and windshield
She was ready for the road again until this happened. I bought the camaro for less than i could get a hood and windshield
0 2016/07/03 06:41:44
Got the 6 out without any major hassles. Cleaning the engine compartment today and then going to move and weld my motor mounts
Got the 6 out without any major hassles. Cleaning the engine compartment today and then going to move and weld my motor mounts
0 2016/07/04 10:18:23
0 2016/09/25 16:11:59
0 2016/09/25 16:12:49
0 2016/09/25 16:13:29
These are my pistons I'll be using cleaned obviously
These are my pistons I'll be using cleaned obviously
0 2016/11/14 10:44:21
I'm guessing this crank is shot because it's not smooth like the other ones
I'm guessing this crank is shot because it's not smooth like the other ones
0 2016/11/14 10:45:57
This is how the master cylinder attaches to the pedal assembaly
This is how the master cylinder attaches to the pedal assembaly
0 2016/11/19 12:01:12
Master coming through firewall
Master coming through firewall
0 2016/11/19 12:07:23