Third Generation F-Body Message Boards
0 2021/04/13 19:13:19
0 2021/04/18 21:23:52
Beginnings for the fiberglass mold
Beginnings for the fiberglass mold
0 2021/04/18 21:23:58
Not the final shape yet
Not the final shape yet
0 2021/04/18 21:24:05
Image on the left is the PCV port
Image on the left is the PCV port
0 2021/05/18 16:51:49
0 2021/06/23 17:13:28
0 2021/07/21 19:46:11
Front
Front
0 2021/08/23 20:57:57
Rear
Rear
0 2021/08/23 20:58:03
Right Front
Right Front
0 2021/08/23 20:58:07
Front nose as it was received
Front nose as it was received
0 2021/12/24 15:34:47
Reinforcing the grill opening
Reinforcing the grill opening
0 2021/12/24 15:34:53
Preparing to remove the license plate area
Preparing to remove the license plate area
0 2021/12/24 15:34:58
Sliced the lower spoiler
Sliced the lower spoiler
0 2021/12/24 15:35:01
Extended the front spoiler so it is level to the ground
Extended the front spoiler so it is level to the ground
0 2021/12/24 15:35:03
Glassed and body worked
Glassed and body worked
0 2021/12/24 15:35:07
The headlight bar is bonded to the inside of the nose which makes it a bolt on component
The headlight bar is bonded to the inside of the nose which makes it a bolt on component
0 2021/12/24 15:35:12
Spoiler is much more aggressive
Spoiler is much more aggressive
0 2021/12/24 15:35:17
Sectioned the rear bumper to the car profile
Sectioned the rear bumper to the car profile
0 2021/12/26 08:47:01
Reinforced the center section of the bumper
Reinforced the center section of the bumper
0 2021/12/26 08:47:07
Male foam buck
Male foam buck
0 2021/12/26 08:47:13
Flush with the taillights
Flush with the taillights
0 2021/12/26 08:47:19
Finished rear bumper
Finished rear bumper
0 2021/12/26 08:47:25
A diffuser will be made for the lower half around the exhaust
A diffuser will be made for the lower half around the exhaust
0 2021/12/26 08:47:31
Supports for the female mold
Supports for the female mold
0 2021/12/26 08:47:37
0 2021/12/26 08:47:43
Female fiberglass mold
Female fiberglass mold
0 2021/12/26 08:47:49
Concept drawing
Concept drawing
0 2021/12/26 09:00:04
Cut the hinged door flange out
Cut the hinged door flange out
0 2022/01/07 17:55:49
Made a template for the filler panel
Made a template for the filler panel
0 2022/01/07 17:56:00
Prepared for welding
Prepared for welding
0 2022/01/07 17:56:07
TIG weld the panel
TIG weld the panel
0 2022/01/07 17:56:13
Cut the hole for the new cap flange
Cut the hole for the new cap flange
0 2022/01/07 17:56:18
TIG weld the filler
TIG weld the filler
0 2022/01/07 17:56:25
All done. Needs body work and paint
All done. Needs body work and paint
0 2022/01/07 17:56:31
0 2022/01/08 07:52:54
0 2022/01/08 07:52:58
0 2022/01/10 19:07:33
0 2022/01/10 19:07:40
0 2022/01/10 19:07:47