Third Generation F-Body Message Boards
Step one to fender exit exhaust
Step one to fender exit exhaust
0 2016/09/29 19:43:06
0 2016/11/25 13:44:35
0 2016/10/25 17:08:42
Projector came in today time for mock up
Projector came in today time for mock up
0 2016/10/27 03:42:09
That matt walter upgrade
That matt walter upgrade
0 2016/09/13 16:15:07
Less then half the pipe i was using with the long tubes. Should help keep the weight down. Dont know how st freindly it will b tho
Less then half the pipe i was using with the long tubes. Should help keep the weight down. Dont know how st freindly it will b tho
0 2016/09/29 19:45:38
Gambled and it paid off they clear everything.
Gambled and it paid off they clear everything.
0 2016/09/15 18:25:49
Finally got around to cutting the plexi a week later. Busy busy busy
Finally got around to cutting the plexi a week later. Busy busy busy
0 2016/10/25 17:05:51
Pa racing tubular a arms
Pa racing tubular a arms
0 2016/11/25 13:45:48
Just need the heat gun and slowly bend it now.
Just need the heat gun and slowly bend it now.
0 2016/10/25 17:09:12
Starting to mock up home made popup deltes.
Starting to mock up home made popup deltes.
0 2016/10/13 17:18:40
Dont mind the beer not my first choice in a cocktail.
Dont mind the beer not my first choice in a cocktail.
0 2016/10/27 03:43:39
The final product
The final product
0 2016/10/08 16:55:19
0 2016/10/08 16:57:28
Out with the old
Out with the old
0 2016/11/25 13:43:08
Just need to build one new wire so it doesnt touch the header.
Just need to build one new wire so it doesnt touch the header.
0 2016/09/15 18:25:21
Cut up some of the old exhaust from the long tubes. Nice and cheap that way
Cut up some of the old exhaust from the long tubes. Nice and cheap that way
0 2016/09/29 19:45:05
The first tin of the headlight buckets for the popup delete
The first tin of the headlight buckets for the popup delete
0 2016/10/16 18:54:07
0 2016/10/08 16:57:53
The new wheels
The new wheels
0 2016/05/25 16:29:52
Guna b an aluminum tin bucket and plexiglass lid, with a 2.5" projector hid fingures crossed
Guna b an aluminum tin bucket and plexiglass lid, with a 2.5" projector hid fingures crossed
0 2016/10/13 17:21:08
A lil poke not to bad
A lil poke not to bad
0 2016/05/25 16:30:08
Clpse to radiator hose but jet and heat wrap will cure my worries
Clpse to radiator hose but jet and heat wrap will cure my worries
0 2016/09/29 19:43:40
0 2016/09/29 19:43:43
Off to get tig welded
Off to get tig welded
0 2016/09/29 19:47:02
I was a lil skeptical of exhaust location but didnt wana use anymore bends. And actually im really happy how it looks when u stand back and look at the car as a whole
I was a lil skeptical of exhaust location but didnt wana use anymore bends. And actually im really happy how it looks when u stand back and look at the car as a whole
0 2016/10/08 16:58:18
Cutting the plexi tomorrow. Not factory looking piece by any means. But it will sufice for me and my plans.
Cutting the plexi tomorrow. Not factory looking piece by any means. But it will sufice for me and my plans.
0 2016/10/16 18:58:46
In with the new
In with the new
0 2016/11/25 13:43:58
Stainless works up and forward headers. 1 7/8 primaries should b more then enough.
Stainless works up and forward headers. 1 7/8 primaries should b more then enough.
0 2016/09/15 18:26:08
0 2016/10/25 17:07:52
Pa racing coil ober kit and castercamber plate
Pa racing coil ober kit and castercamber plate
0 2016/12/16 21:13:29
Had to grind a bit off the top of the lakewoods but a lil red paint u wont hardly notice
Had to grind a bit off the top of the lakewoods but a lil red paint u wont hardly notice
0 2016/12/16 21:14:00
Shedding weight this winter.
Shedding weight this winter.
0 2016/12/16 21:14:39
Sitting nice and low and level now with the coil overs
Sitting nice and low and level now with the coil overs
0 2016/12/30 17:19:25