Third Generation F-Body Message Boards
0 2017/04/17 07:08:30
0 2017/03/12 14:13:55
0 2017/03/12 14:13:32
0 2017/02/10 09:53:15
0 2017/02/09 23:31:14
0 2017/02/09 23:30:32
0 2017/02/02 11:58:28
0 2017/01/24 13:35:13
0 2017/01/13 00:07:27
0 2017/01/12 23:52:04
0 2017/01/12 23:44:59
0 2017/01/12 23:42:48
0 2017/01/07 08:32:34
0 2017/01/07 08:32:21
0 2017/01/07 08:32:12
Had to change the bolt length also
Had to change the bolt length also
0 2017/01/07 08:31:56
0 2017/01/03 23:09:53
0 2017/01/03 23:07:37
0 2017/01/03 21:48:07
0 2017/01/02 15:08:41
0 2017/01/02 14:14:45
0 2017/01/02 13:54:22
Rear end finally ready from everything!!!
Rear end finally ready from everything!!!
0 2016/12/05 13:59:23
0 2016/12/04 11:34:31
0 2016/12/04 11:34:20
0 2016/12/04 11:34:05
Complete rear. Only handbrake cables remaining
Complete rear. Only handbrake cables remaining
0 2016/12/04 11:33:48
View from the back
View from the back
0 2016/11/16 12:22:46
One other tip. If you ever take out the springs and need to change the engine mounts, do it before reinstalling the springs. I installed the mounts afterwards and had to waste a lot of time fishing the nut using magnetized telescopic prongs. With the springs off it is way easier.
One other tip. If you ever take out the springs and need to change the engine mounts, do it before reinstalling the springs. I installed the mounts afterwards and had to waste a lot of time fishing the nut using magnetized telescopic prongs. With the springs off it is way easier.
0 2016/11/16 12:22:33
0 2016/11/12 10:36:36
0 2016/11/12 10:36:22
Now I can begin to assemble suspension stuff... Will keep you posted.
Now I can begin to assemble suspension stuff... Will keep you posted.
0 2016/10/15 04:19:03
The Bright Red is INCREDIBLY Bright :)
The Bright Red is INCREDIBLY Bright :)
0 2016/10/15 04:18:50
Underside and Engine bay also ready.
Underside and Engine bay also ready.
0 2016/10/15 04:18:36
0 2016/10/15 04:16:02
More Progress!!!
More Progress!!!
0 2016/10/15 04:15:48
Metal part was completely redone. No filler whatsoever
Metal part was completely redone. No filler whatsoever
0 2016/10/12 13:27:51
0 2016/09/29 10:08:55
0 2016/09/29 10:06:30
0 2016/09/24 09:53:42