Third Generation F-Body Message Boards
3.in Extended ARP studs have plenty of grip range left even with a 5/8 spacer
3.in Extended ARP studs have plenty of grip range left even with a 5/8 spacer
0 2020/12/26 00:54:45
A quick pass with a TIG welder makes a single socket. Spline socket+21MM SOCKET
A quick pass with a TIG welder makes a single socket. Spline socket+21MM SOCKET
0 2020/12/26 00:54:02
The acorn nuts have a dumb socket
The acorn nuts have a dumb socket
0 2020/12/26 00:53:20
I used little 12mm x 1.5 acorn nuts as the WELD wheels have small Tapered seats.
I used little 12mm x 1.5 acorn nuts as the WELD wheels have small Tapered seats.
0 2020/12/26 00:53:08
0 2020/12/26 00:52:45
rear bump stops were trimmed in height so i could lower the car more. no tires rub when rub on the bump stops
rear bump stops were trimmed in height so i could lower the car more. no tires rub when rub on the bump stops
0 2020/12/26 00:49:34
you will need to hammer this area to clear the tire. SUPER easy and fast
you will need to hammer this area to clear the tire. SUPER easy and fast
0 2020/12/26 00:46:38
painted over bare metal
painted over bare metal
0 2020/12/26 00:43:49
(aftermarket) rubber bump stop trimmed about 3/8in
(aftermarket) rubber bump stop trimmed about 3/8in
0 2020/12/26 00:43:38
bump stop and chassis ground down.
bump stop and chassis ground down.
0 2020/12/26 00:43:12
Bump steer kit was used to get 0.002in of bump steer at TOTAL front suspension travel. nearly perfect. Race teams recommend no more than 0.010in at each inch of suspension travel.
Bump steer kit was used to get 0.002in of bump steer at TOTAL front suspension travel. nearly perfect. Race teams recommend no more than 0.010in at each inch of suspension travel.
0 2020/12/26 00:31:53
1/2in extended studs Via QA1 Ultimate ball-joints Bump steer kit is REQUIRED if you install extended studs.
1/2in extended studs Via QA1 Ultimate ball-joints Bump steer kit is REQUIRED if you install extended studs.
0 2020/12/26 00:29:46
Bump Steer kit fits under the 18x11s with 0.955in of spacers. About 1/4in of room between the wheel lip and the bolt. Aerospace 12 point bolt
Bump Steer kit fits under the 18x11s with 0.955in of spacers. About 1/4in of room between the wheel lip and the bolt. Aerospace 12 point bolt
0 2020/12/26 00:29:18
Bump steer Set up to near perfection 12 point Aerospace grade 5/8 bolt
Bump steer Set up to near perfection 12 point Aerospace grade 5/8 bolt
0 2020/12/26 00:27:51
added some nuts behind the steering stops as an easy fix.
added some nuts behind the steering stops as an easy fix.
0 2020/12/26 00:21:21
front fenders were rolled
front fenders were rolled
0 2020/12/26 00:17:30
little bit trimmed off the front GFX
little bit trimmed off the front GFX
0 2020/12/26 00:15:11
metal cut and bent back, pretty easy, although I kinda rushed it a bit.
metal cut and bent back, pretty easy, although I kinda rushed it a bit.
0 2020/12/26 00:13:40
trimming the plastic back
trimming the plastic back
0 2020/12/26 00:13:05
91-92 GFX kit
91-92 GFX kit
0 2020/12/26 00:12:25
0 2020/12/26 00:08:00
rear set to 6.5in of back spacing, rear end is Stock track width
rear set to 6.5in of back spacing, rear end is Stock track width
0 2020/12/26 00:07:41
6.0in of back spacing simulated for the front. Note that my BBU Wilwood brake kit pushes out track width my 0.300in on each side
6.0in of back spacing simulated for the front. Note that my BBU Wilwood brake kit pushes out track width my 0.300in on each side
0 2020/12/26 00:07:25
6.6in of back spacing on all 4 5/8in spacers in the front to get the back spacing needed and still be able to rotate tires
6.6in of back spacing on all 4 5/8in spacers in the front to get the back spacing needed and still be able to rotate tires
0 2020/12/25 23:55:01
The wheels on my 92 Autocross car with a unfinished 10in spoiler
The wheels on my 92 Autocross car with a unfinished 10in spoiler
0 2020/12/25 23:54:02
WELD RACING S71 18X11
WELD RACING S71 18X11
0 2020/12/25 23:53:30
0 2020/11/26 21:14:33
0 2020/07/17 23:18:54
0 2020/07/03 02:07:49
0 2019/10/18 17:10:34
0 2019/10/14 00:23:49
0 2019/08/21 01:30:31
0 2019/08/10 11:22:08
0 2019/08/10 11:22:06
0 2019/08/10 11:21:49
0 2019/07/25 10:16:19
0 2019/06/21 12:15:29
0 2019/06/20 22:59:46
0 2017/09/09 17:52:06
0 2017/09/07 19:09:04